Compare Prices

Stanley Jack Plane


 - Stanley 12-137 No.62 Low Angle Jack Plane
Stanley 12-137 No.62 Low Angle Jack Plane

Includes No. 62 Low Angle Jack Plane - 12-137. Stanley Hand Tools is a brand of hand tools. It is a division of Stanley Black & Decker, following the 2010 merger of The Stanley Works with Black & Decker

  • Brand: Stanley
  • ASIN: B002B56CUY
  • UPC: 787721672548
 - Taytools 469607 Jack Smoothing Bench Hand Plane #5, 14-1/4
Taytools 469607 Jack Smoothing Bench Hand Plane #5, 14-1/4" Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote

This #5 jack plane is the perfect tool to smooth and flatten areas and will achieve a flat and smooth finish. This jack plane is ideal for the cabinet maker and discerning woodworker. The body and frog are made from tough ductile cast iron. The sole and sides are precision machined to within 0.003" over the entire length of the sole. The knob and tote are carefully shaped, sanded, oiled and hand-rubbed Sapele. The 0.120 inch thick and 2 inch wide tool steel iron is hardened and tempered to 55-60 Rockwell C. This plane has appropriate mass and weighs in at 5.45 pounds. The frog can be adjusted forward and back. The lever cap is made from plated cast iron. Cap iron screws and adjusting wheels are made from polished brass. The yoke is a solid one piece casting. Bed angle is 45 degrees.

  • Brand: Taytools
  • ASIN: B07D47HF7T
  • UPC: 700667469607
 - No.5 Jack Plane (2in)
No.5 Jack Plane (2in)

The Bailey Jack plane is designed for rapid stock removal when preparing timber prior to finishing. Machined frog and cutter seatings to eliminate blade chatter. Unbreakable plastic handles and special cap iron design which curves shavings and prevents clogging. Length: 355 mm (14in).Cutter width: 50 mm (2in). No.5 Jack Plane (2in)

  • Brand: Stanley Tools
  • ASIN: B0001IWDDI
  • UPC: 604310237684
 - Taytools 469614 Smoothing Bench Hand Plane #4, 9-3/4
Taytools 469614 Smoothing Bench Hand Plane #4, 9-3/4" Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote

This #4 smoothing plane is the perfect tool to smooth surfaces and will achieve a flat and smooth finish. This smoother is ideal for the cabinet maker and discerning woodworker. The body and frog are made from tough ductile cast iron. The sole and sides are precision machined to within 0.003" over the entire length of the sole. The knob and tote are carefully shaped, sanded, oiled and hand-rubbed Sapele. The 0.125 inch thick and 2 inch wide tool steel iron is hardened and tempered to 55-60 Rockwell C. This plane has appropriate mass and weighs in at 4.11 pounds. The frog can be adjusted forward and back. The lever cap is made from plated cast iron. Cap iron screws and adjusting wheels are made from polished brass. The Yoke is a solid one piece casting. Bed angle is 45 degrees.

  • Brand: Taytools
  • ASIN: B07D47NW56
  • UPC: 700667469614
 - Grizzly H7566 14-Inch Smoothing Plane
Grizzly H7566 14-Inch Smoothing Plane

Used for final finishing work, this Plane has a perfectly flat sole that will smooth any wood surface. Features include rosewood handles and knobs, full plane iron adjustments, cast iron bases, frog and lever caps, chip breakers and knurled brass adjusting nuts. Ground serrated sole improves sliding action by reducing resistance. Beautifully made with precision fit and finish.

  • Brand: Grizzly
  • ASIN: B000E326ZK
  • UPC: 690550175664
 - Stanley 12-905 14-Inch No.5 Contractor Grade Smooth Bottom Bench Plane
Stanley 12-905 14-Inch No.5 Contractor Grade Smooth Bottom Bench Plane

  • Brand: Stanley
  • ASIN: B00004UDKW
  • UPC: 784497199958
 - Stanley - No.4 Premium Bench Plane
Stanley - No.4 Premium Bench Plane

Stanley 12-136 No 4 Sweetheart Smoothing Bench Plane. Iron is made from extra-thick 1/8" (3.18 mm) A2 steel for excellent edge retention. One-piece base and frog virtually eliminate chatter. Cherrywood handle and knob for comfort. Norris-type adjuster with lateral locking feature. Adjustable throat plate for different types of wood. Replacement Blade 12-141. Length: 10-45/64",271.86mm. Width: 2-1/2",63.5mm. Cutter Width: 2".

  • Brand: Stanley
  • ASIN: B002LTUOI6
  • UPC: 013523111979
 - Taytools 469584 Jointer Bench Hand Plane #7, 22
Taytools 469584 Jointer Bench Hand Plane #7, 22" Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote

This #7 jointer plane is the perfect tool to true, shoot and flatten larger boards and will achieve an accurate and smooth finish. This jointer plane is ideal for the cabinet maker and discerning woodworker. The body and frog are made from ductile cast iron. The sole and sides are precision machined to within 0.006" over the entire length of the sole. The knob and tote are carefully shaped, sanded, oiled and hand rubbed Sapele. The 0.120 inch thick and 2-3/8 inch wide tool steel iron is hardened and tempered to 55-60 Rockwell C. This plane has appropriate mass and weighs in at 8.30 pounds. The frog can be adjusted forward and back. The lever cap is made from plated cast iron. Cap iron screws and adjusting wheels are made from polished brass. The yoke is a solid one piece casting. Bed angle is 45 degrees.

  • Brand: Taytools
  • ASIN: B07D48FT3V
  • UPC: 700667469584
 - Taytools 468280 Number 62 Low Angle Jack Plane with 12 Degree Bed, 14
Taytools 468280 Number 62 Low Angle Jack Plane with 12 Degree Bed, 14" Overall, Ductile Cast Iron Body, Blade Hardness 55-60 HRC

This Number 62 low angle jack plane is the perfect tool for to smooth, flatten and joint boards. It excels at trimming end grain This low angle jack plane is ideal for the cabinet maker and discerning woodworker. The body is made from nearly indestructible stress-relieved ductile cast iron. The sole and sides are precision lapped to within 0.003" over the entire length of the sole. Overall length is 14 inches long and 2-1/2 inches wide. Weight is 4.6 pounds. The blade is adjusted forward/back via the solid brass rear adjustment knob. The 3/16 inch thick by 2 inch wide tool steel iron is hardened and tempered to 60-65 Rockwell C. Blade is ground at 25 degrees. The mouth opening can be easily adjusted for both fine and coarse work. This plane has good mass to reduce chatter and stay in the cut. Bed angle is 12 degrees.

  • Brand: Taytools
  • ASIN: B07GWN19PM
  • UPC: 700667468280
 - WoodRiver #5 Bench Plane, V3
WoodRiver #5 Bench Plane, V3

Introducing the New and Improved Version 3 WoodRiver Bench Planes! Our new Version 3 bench planes are still based on the reliable Bedrock design and feature heavy, stress –relieved ductile iron castings, fully machined adjustable frogs and high carbon steel blades but we took the opportunity between manufacturing runs to do a critical review and make a few improvements. We’ve changed the shape of the rear tote and increased the diameter of the blade adjustment wheel to make advancing the blade a bit easier. We improved the lateral adjustment lever and added a traditional style bearing for better control of the blade. We’ve made numerous changes to the castings that result in better “feedback” and a solid feel to the user. Working closely with our own manufacturer, we’ve continued to make improvements in machining, finish and functionality which we feel have yielded hand planes that are meant to be used and offer an extraordinary value. Tools require minimal tune-up prior to use.An all-purpose plane, the No. 5, or jack, plane will perform almost any job you might need done, while providing you with experience and feed back to help you pick your next plane. The 14” length makes the No. 5 useful for stock removal, smoothing, shooting miters, and jointing smaller work.

  • Brand: WOODRIVER
  • ASIN: B003VQYAVU
  • UPC: 844788010178
 - Stanley 12-136 No. 4 Smoothing Bench Plane
Stanley 12-136 No. 4 Smoothing Bench Plane

Includes No. 4 Sweetheart Smoothing Bench Plane - 12-136. Stanley Hand Tools is a brand of hand tools. It is a division of Stanley Black & Decker, following the 2010 merger of The Stanley Works with Black & Decker

  • Brand: Stanley
  • ASIN: B002B56CUO
  • UPC: 076174121360
 - GreatNeck C4 Bench-Jack Planes 9 Inch Plane 2 Inch Cutter
GreatNeck C4 Bench-Jack Planes 9 Inch Plane 2 Inch Cutter

9", adjustable block plane, bench jack plane, top quality plane featuring hardened & tempered Alloy tool steel Cutter, cast iron body is accurately machined & polished for strength & durability, 2" width Cutter, dual wood handle for extra control, edge is fully adjustable both Laterally & for depth of cut.

  • Brand: Great Neck
  • ASIN: B0002YUKBS
  • UPC: 082901204978
 - Taytools 469591 Fore Bench Hand Plane #6, 18
Taytools 469591 Fore Bench Hand Plane #6, 18" Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote

This #6 Fore plane is the perfect tool to joint, flatten and smooth larger areas and will achieve a flat and smooth finish. This fore plane is ideal for the cabinet maker and discerning woodworker. The sole and sides are precision machined to within 0.005" over the entire length of the sole. The knob and tote are carefully shaped, sanded, oiled and hand-rubbed Sapele. The 0.125 inch thick and 2-3/8 inch wide tool steel iron is hardened and tempered to 55-60 Rockwell C. This plane has appropriate mass and weighs in at at 7.86 pounds. The frog can be adjusted forward and back. The lever cap is made from plated cast iron. Cap iron screws and adjusting wheels are made from polished brass. The yoke is a solid one piece casting. Bed angle is 45 degrees.

  • Brand: Taytools
  • ASIN: B07D47X3DC
  • UPC: 700667469591
 - Shop Fox D2674 2-Inch by 14-Inch Jack Plane
Shop Fox D2674 2-Inch by 14-Inch Jack Plane

The Jack Plane, with its longer sole, is used to follow after the smoothing plane for a greater degree of lumber flatness. Body measures 14" long. Cast iron construction.

  • Brand: Shop Fox
  • ASIN: B0000DD1BO
  • UPC: 769433426749
 - Stanley 12-137 No. 62 Low Angle Jack Plane
Stanley 12-137 No. 62 Low Angle Jack Plane

FEATURES: Iron is made from extra thick 3/16" A2 steel for superior edge retention. Cherry wood handle and knob for comfort. Norris type adjustment for ease of use. Adjustable throat plate for different types of wood.

  • Brand: Stanley-Inc
  • ASIN: B07F1YG1QD
  • UPC: 826659252443
 - WoodRiver #62 Low Angle Jack Plane
WoodRiver #62 Low Angle Jack Plane

Originally advertised as a plane for heavy stock removal across the grain, the No. 62 has found a home as a smoother and is quite popular among collectors. The WoodRiver No. 62 is faithful to the original design, but is almost a full pound heavier at approximately 4.6 lbs. It features a body cast from ductile iron, with a bed angle of 12°, a bubinga tote and front knob, and a high-carbon steel blade with a 25° bevel. The plane measures a little less than 14" in length x 2.4" in width and has a 2"-wide blade.

  • Brand: WOODRIVER
  • ASIN: B00LUNUMAE
  • UPC: 844788022133
 - Stanley Metal brush 62 flat jack
Stanley Metal brush 62 flat jack

Stanley 12-137 No. 62 Sweetheart Low Angle Jack Plane. Iron is made from extra thick 3/16" (4.75 mm) A2 steel for excellent edge retention. Cherry wood handle and knob for comfort. Norris type adjustment for ease of use. Adjustable throat plate for different types of wood. Replacement Blade 12-142. Length: 14",355.6mm. Width: 2-13/32",61.12mm. Cutter Width: 1-63/64".

  • Brand: Stanley
  • ASIN: B005GVCFOW
 - Stanley 12-404 No. 4 Adjustable Bench Plane with 2-Inch Cutter
Stanley 12-404 No. 4 Adjustable Bench Plane with 2-Inch Cutter

  • Color: Grey
  • Brand: Stanley
  • ASIN: B000FK3WI2
  • UPC: 724137883618

Stanley Jack Plane B471 Search Results

Looking for more Stanley Jack Plane similar ideas? Try to explore these popular searches: Edward Gorey Cats, Pearl White Glitter, and Omega Designer Bracelet.

Look at Stanley Jack Plane Video Reviews

Stanley No. 62 Low Angle Jack Plane: Unboxing and Review

Stanley Jack Plane Review

In this video I unbox a Stanley No 62 and see if it's worth the buy. I test it right out of the ...

Tags: Stanley No 62,Low Angle Jack Plane,Tool review,...

Handplane Essentials - Why Chris Schwarz is wrong about the 'new' Stanley Planes

Stanley Jack Plane Review

Stanley Low Angle Jack: https://amzn.to/2KqKYE6 #Stanley #No62 #sweetheart #handplane

Tags: Chris Schwarz,Handplane Essentials,Stanley,Veri...

Low Angle Jack Plane Review (One Hand Plane For Multiple Tasks)

Stanley Jack Plane Review

For my first tool review, I go over the advantages of the low angle jack plane. This is the most ...

Tags: low angle jack plane,low angle jack plane revie...

The Shop's Most Versatile Plane with Anne Briggs

Stanley Jack Plane Review

Anne Briggs from Anne of All Trades shows you the most versatile handplane in her shop, the low-a...

Tags: Popular,Woodworking,anne of all trades,anne bri...

Stanley No.62 Low Angle Jack Plane

Stanley Jack Plane Review

Tuning, cleaning and why you need a low angle Jack Plane. Amazon affiliate link: http://amzn.to/...

Tags:

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com