Rigid Hitch Pair of 4-Bolt on 4 Inch Hub Assembly (AKSQ-200044) Includes (2) Square Shaft 1 Inch Straight Spindles & Bearings
Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (2) - 4-Bolt on 4 inch bolt center hubs for 2,000 lb axles, (2) - 1" straight spindles, (2) castle nuts, (2) cotter pins, (8) 1/2-20 lug nuts, (2) 1.987 O.D - 1.249 I.D double lipped grease seals, (4) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.
- Brand: Rigid Hitch
- ASIN: B013VG08CO
Square Stock - Trailer Axle Spindle For 1-1/16" I.D Bearings
This square bar trailer axle spindle carries a 1,250 pound rating. The bearing surfaces are 1-1/16" diameter and the mounting surface is 1-1/2" square. Includes nut, washer and cotter pin. Please note: This spindle requires a grease seal with a 1.48" inside diameter.
- Brand: Rigid Hitch
- ASIN: B018WIVJQA
Square Stock - Trailer Axle Spindle For 1-3/8 Inch to 1-1/16 Inch I.D Bearings
This square bar trailer axle spindle carries a 1,750 pound rating. The inner bearing surface is 1.376" diameter, the outer bearing surface is 1.062" diameter and the mounting surface is 1.5" square x 3.5" long. Accepts a 1.72" I.D seal (not included). Includes nut, washer and cotter pin.
- Brand: Rigid Hitch
- ASIN: B018WJWJ0Y
C.E. Smith Axle Tie Plate Kit f/1-1/2" Square Axle 
Axle Tie Plate Kit f/1-1/2" Square AxleThis kit has everything you need to mount fresh springs to a fresh springs to a fresh axle.Includes: 2 galvanized tie plates 4 yellow zinc plated U-bolts 8 zinc plated nuts and lock washers
- Brand: CE Smith
- ASIN: B00TLEXZQM
Sturdy Built Single Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2x3 axle - 6 1/4" Long
All the hardware to mount a single axle to your leaf springs together in one kit. The kit is designed to install a 2 inch by 3 inch square axle, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (2) U-Bolts and (1) 4 hole plate on each side. This kit includes (4) galvanized square U-Bolts, (2) Galvanized 4 Hole Mounting Plates, and (8) galvanized nuts and lock washers, so you can attach both springs to a single axle. This Trailer U Bolt kit is most common on boat trailers with either 3500 lb or 3,700 lb trailer axles using 1 ¾ wide springs, but it will also fit 2-inch wide springs.
- Brand: Sturdy Built
- ASIN: B07PMTK935
Supreme Suspensions - Full Lift Kit for 2007-2019 Silverado Sierra 1500 3.5" Front Lift Strut Spacers + 3" Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims
Supreme Suspensions - 3.5" Front Lift Kit and 3" Rear Lift KitEnhance the look of your vehicle and run larger tires with Supreme Suspensions' 3.5" Front and 3" Rear Lift Kit. Developed and rigorously tested by in-house engineers, our front strut spacers and rear blocks are precision machined using only the latest in metal fabrication technology. Each piece is crafted with the optimal material blend for its specific application, ensuring a lifetime of dependability under even the most extreme riding conditions. Included in this kit is our newly designed set of zinc phosphate coated U-bolts, ISO 9001 certified and stamped to satisfy the highest quality control standards. Supreme Suspensions U-bolts are five times more corrosion resistant than those with typical zinc plating, in accordance with ASTM B117 testing. Axle alignment shims are also included to optimize pinion angles and preserve your stock ride quality.FITMENT 2007 - 2019 Chevy Silverado 1500 (2WD 4WD) 2007 - 2019 GMC Sierra 1500 (2WD 4WD) Does not fit 2007 "Classic" models Only fits 6-Lug modelsCONTENTS (4x) Front Lift Strut Spacers (2x) Rear Lift Blocks (4x) Square Bend U-Bolts (2x) Axle Alignment Shims Installation Hardware Installation Instructions Supreme Suspensions Pro PackINSTALLATIONEasy bolt-on installation take...
- Brand: Supreme Suspensions
- ASIN: B00IOAHI5S
Tie Down Engineering 81185 Square Marine Axle Tie Plate Kit
Axle Plate Kit fits 2" square axles. Each kit contains 4 u-bolts, 8 locknuts and 2 five hole tie plates. Fits 2 square axles.
- Brand: Tie Down Engineering
- ASIN: B0000AYCBE
- UPC: 081628811858
Ultra-Tow Tie Plate U-Bolt Set - Fits 2in. Square Axles, 2000-Lb. Capacity, Model# 56117
This Ultra-Tow Tie Plate U-Bolt Set is for 1.75in.W springs. Kit Includes: (4) U-bolts, (8) Nuts, (2) Spring plates, Axle Diameter (in.): 2, Spring Width (in.): 1 3/4, Material: Steel, Fits Axle Capacity (lbs.): 2,000
- Brand: Ultra-Tow
- ASIN: B007FB02SC
- UPC: 081628561173
Sturdy Built Single Axle Galvanized U Bolt Kit for mounting Boat Trailer Leaf Springs for 2x2 axle - 5 1/4" Long
All the hardware to mount a single axle to your leaf springs together in one kit. The kit is designed to install a 2 inch by 2 inch square axle, and the Hot-Dipped galvanized coating on all of the parts helps prevent rust in the harsh marine environments. This U-Bolt Kit is used to mount your trailer leaf springs to your axle by using (2) U-Bolts and (1) 4 hole plate on each side. This kit includes (4) square U-Bolts, (2) Galvanized 4 Hole Mounting Plates, and (8) galvanized nuts and lock washers, so you can attach both springs to a single axle. This Trailer U Bolt kit is most common on boat trailers with either 2,220 lb or 3500 lb trailer axles using 1 ¾ wide springs, but it will also fit 2-inch wide springs.
- Brand: Sturdy Built
- ASIN: B07PPW15X2
American Automotive 3" Rear Suspension Lift Steel Blocks + Extra Long 12" Square Leaf Spring Axle U Bolts
American Automotive steel lift blocks are stronger than aluminum. They are designed to increase rear load and towing capacity. American blocks absorb noise and vibrations, and are tapered for perfect pinion alignment. American Automotive u bolts are manufactured for maximum clamp force and are guaranteed for life. Made of cold drawn certified 1541 carbon steel OEM factory material with grade 8 hardware, American u bolts embody extreme strength and maintain OEM handling characteristics. These square u bolts are engineered to clamp 2.5 inch wide leaf springs and are 12 inch extra-long measured from the bottom of the bend to the bottom of the threads. American u-bolts provide an even distribution of pressure to protect against premature spring failure and unwanted movement. Allowances need to be made for all overloads and aftermarket leafs. 5 inch thread can be cut down to fit many applications. Lift Block Specs: 5" Long x 2.5" Wide, 3" Tall with 9/16th Pin. U-Bolt Specs: Square, 12" Length x 2.5" Width x 9/16 Thread Pitch
- Brand: American Automotive
- ASIN: B01GBUV876
- UPC: 042485319826
Look at Square Axle Video Reviews
Axle 61GA Galvanized Square
In this video we’ll be taking a look at item number 61GA a Dexter brand square galvanized axle, f...
Automatic Square Axle Welding
Special Features of this system 1. The square axles - the Middle square pipe with spindles duly...
Walk around of our Square Axle bars
These have 2 inch flats and are 2 1/2 inches wide over all.
Review of Lippert Components Trailer Axles - Axle Riser - LC270682 - etrailer.com
Click for more info and reviews of this Lippert Components Trailer Axles: https://www.etrailer.c...
How To Straighten Axles And Square Axle Heads - Pinewood Racing Car | PineCar Derby
Find Out More At: http://pinecar.com. Learn how to straighten axle shafts, bevel axle heads and s...
Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com