Compare Prices

Silicone Mold Making


 - Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb
Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb

Use this silicone mold making rubber for making perfect reproductions that capture intricate detail of original models. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time. For the novice mold maker - OOMOO30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Technical Information Mixing Ratio: one to one by volume (100a:130b by weight) Pot Life: 30 min. Demold: 6 hrs. Color: lavender properties (part a and b mixed) Viscosity: 4,250 cps g/cc: 1.34 Cu. In./Lb.: 20.6 Tensile Strength: 240 psi Elongation at Break: 250% Die C Tear Strength: 40 pli Compression Set: 37% Shrinkage: .0025 In./In. Net weight 16 oz. (454 Grams) For Best Results: Store and use silicone products at room temperature. If material freezes, silicone base will become very thick. Simply allow product to get down to room tempe...

  • Color: Blue
  • Brand: Smooth-On
  • ASIN: B004BNF3TK
  • UPC: 885241574127
 - Mold Star 20T Silicone Mold Making Rubber - Trial Unit
Mold Star 20T Silicone Mold Making Rubber - Trial Unit

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers. MOLD STAR 20T: MIX RATIO: 1:1 by volume; POT LIFE: 6 minutes; DEMOLD TIME: 30 minutes; SHORE A: 20; COLOR: Transparent Read the MSDS before using. Consult the Technical Bulletin for further information. Adult Supervision Required. Keep Out of the Reach of Children.

  • ASIN: B00LU4YFK6
  • UPC: 751635587410
 - Silicone Mold Making Kit - Creative Silicone Molds for Art Projects and DIY - Includes Silicone Liquid Rubber Compound - Ideal for Copies, Home or Industrial Use
Silicone Mold Making Kit - Creative Silicone Molds for Art Projects and DIY - Includes Silicone Liquid Rubber Compound - Ideal for Copies, Home or Industrial Use

Our products are developed and tested under highest conditions, being certified by all necessary standards of quality, in order to meet the rigorous expectations of our customers. The selection of our suppliers and manufacturers is based on careful screening processes that guarantee excellent products. Why should you purchase this item? Order this silicone mold making kit for creating lovely sculptures or replicas, use them as gifts to impress your loved ones or simply to decorate your room or home, and you’ll be amazed at the gorgeous results! This silicone set can be used for industrial projects as well, its low viscosity, easy mixing and one-on-one scale being perfect for the job. Some of the amazing features of this product: Premium quality materials; Perfect for beginners and experienced; One-on-one scale; Pot life:30 minutes; Demold: 6 hours; For best results, store at room temperature. ADD TO CART NOW and you’ll fall in love instantly with this silicone mold set!

  • Brand: Beckly
  • ASIN: B07FXBTC1Z
  • UPC: 754235562863
 - Smooth-On OOMOO 25 - FAST Curing Mold Making Silicone Kit - 2 Pints - EASY!
Smooth-On OOMOO 25 - FAST Curing Mold Making Silicone Kit - 2 Pints - EASY!

Smooth-On Oomoo 25 2 Pint Kit (contains 1 pint of part A and 1 pint of Part B) OOMOO® Silicone Rubber - No Scale or Vacuum Chamber Required. OOMOO® 25 is an easy to use silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). This silicone is easy to work with and has a very low viscosity for easy mixing and pouring. Vacuum degassing is usually not necessary. Takes excellent detail. Cures at room temperature with negligible shrinkage and good tear strength. OOMOO® 25 features a 15-minute pot life and 75 minute cure time. OOMOO® 25 & 30 are suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Tin cure silicone. Cures to an opaque blue-lavendar. Tip: *Do not cast platinum cure silicone into Oomoo silicone or any other tin cure silicone*

  • Color: Blue
  • Brand: Smooth-On
  • ASIN: B01C4YQ4TU
  • UPC: 821079268753
 - Crafter's Companion A20501 Amazing Casting Products Alumilite High Strength 3 Liquid Mold Making Rubber, 1-Pound, Pink
Crafter's Companion A20501 Amazing Casting Products Alumilite High Strength 3 Liquid Mold Making Rubber, 1-Pound, Pink

Alumilite Corp-High strength 3 liquid mold making rubber: pink. Perfect to use when you have the deepest undercuts! the high strength rubber is thin enough that it will pick up all the detail of your original without the need for vacuum or pressure casting. This package contains one pound of flexible mold-making rubber mix. Complies with ASTM d 4236-94 and LHAMA. Made in USA.

  • Color: Pink
  • Brand: Crafter's Companion
  • ASIN: B004BNA6VA
  • UPC: 717917211596
 - Mold Star 15 SLOW Moldmaking Silicone Rubber - Trial Unit
Mold Star 15 SLOW Moldmaking Silicone Rubber - Trial Unit

Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers.MIX RATIO: 1:1 by volume; POT LIFE: 50 mins; DEMOLD TIME: 4 hrs; SHORE A: 15; COLOR: Green

  • Color: Mold Star 15 Liquid Rubber
  • Brand: Smooth-On, Inc.
  • ASIN: B00ATDV5BQ
  • UPC: 751635292413
 - Smooth-Cast 300 Liquid Casting Plastic - Gallon Unit
Smooth-Cast 300 Liquid Casting Plastic - Gallon Unit

Smooth Cast 300 is a liquid plastic ,ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble-free. Vacuum degassing is not necessary. It offers the convenience of a one to one mix ratio (by volume). 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable. Read MSDS before use - Adult Supervision Required. Keep Out of the Reach of Children - for more information visit www.smooth-on.com

  • Brand: Smooth-On
  • ASIN: B0742MBCH3
  • UPC: 751635476615
 - Simple 1:1 Mix Silicone Mold Making Rubber, AM 125 1 Gallon
Simple 1:1 Mix Silicone Mold Making Rubber, AM 125 1 Gallon

This is a simple 1:1 mix Silicone Mold Making RTV designed for beginers to mold making. It is ideal for most mold making applications and cures in less than two hours. Use petroleum jelly to separate silicone when using with glass and other silicones for the best results. **Do NOT expose AM 125 to any fluctuating temperatures; AM 125 works best when kept at a constant 73 degrees F. Re-cap the containers immediately after pouring. Store AM 125 at 72F/room temperature. AM125 HAS A 60 DAY SHELF LIFE ONCE CONTAINERS ARE OPENED.** Great for first time mold makers. Widely used for making soap and candle molds. NOTE: THIS PRODUCT IS NOT ELIGIBLE FOR AMAZON FREE SHIPPING.

  • Brand: AeroMarine Products
  • ASIN: B0047R0LQA
  • UPC: 609465398945
 - Alumilite Amazing Mold Putty Kit, 0.66-Pound
Alumilite Amazing Mold Putty Kit, 0.66-Pound

Alumilite Amazing Mold Putty Kit, 0.66-Pound

  • Color: Yellow
  • Brand: Alumilite
  • ASIN: B0058VAG5A
  • UPC: 046955299625
 - Cast-A-Mold 25T Silicone Rubber (1/2 Gallon)
Cast-A-Mold 25T Silicone Rubber (1/2 Gallon)

RTV Silicone Mold Making Rubber for Resin CastingCast-A-Mold 25T is a general purpose rtv silicone elastomer which exhibits excellent tear strength, long library life, and accurate detail reproduction. Cast-A-Mold 25T is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is easy to mix and de-air, and will cure at room temperature over virtually any surface. Cast-A-Mold 25T is extremely useful for applications where superior physical properties are required. Properties:Product: Cast-A-Mold 25T Mix Ratio: 10:1 by weight Working Time: 3.0 hours Demold Time: 16 hour Heat Deflection: 300 f + Tensile Strength, psi: 660 Elongation %: 390 Tear Resistance, ppi: 140 Color: Green Hardness: A-25 Viscosity: 40,000 cpsWe typically ship same day when orders are received by 2 pm EST Monday-Friday

  • Color: blue
  • Brand: specialtyresin
  • ASIN: B008UW4OPC
  • UPC: 661799648660
 - RTV Silicone Rubber for Mold Making - Food Grade - 1:1 Mix Ratio (1 Gallon)
RTV Silicone Rubber for Mold Making - Food Grade - 1:1 Mix Ratio (1 Gallon)

RTV Silicone Rubber for Mold Making - Food Grade - 1:1 Mix RatioCast-A-Mold Platinum is a platinum (addition) cured silicone rubber used for a variety of applications. It exhibits an easy 1:1 mix ratio, low viscosity, excellent tear strength, tensile strength, elongation, heat deflection, and long library life. Cast-a-Mold Platinum can be used to make translucent rubber molds for casting candies, cakes, polyurethanes, epoxy's, polyester's, cement, low mely alloys, concrete, soap, wax, plaster, etc.. It is user friendly, translucent, FDA compliant, and will cure at room temperature.Platinum cured silicone rubber can be heat accelerated. For example if you heat the mold at 150 f the cure time will be reduced from 8 hours to 30 minutes.Properties:Product: Cast-A-Mold Platinum Mix Ratio: 1:1 by weight Working Time: 40.0 Minutes Demold Time: 8.0 Hours Heat Deflection: 400 f +Tensile Strength, psi: 580 Elongation %: 500 Tear Resistance, ppi: 160 Color: Semi-Clear Hardness: 20-A Viscosity: 10,000 - 12,000 cps Note: For food applications you will need to wash the cured mold with warm water and soap before using. Addition cured silicone rubber may be inhibited by certain contaminants resulting in tackiness on the surface of the mold. Latex, sulfur based clays, tin cured silicone rubber, a...

  • Color: Translucent
  • Brand: Specialty Resin & Chemical
  • ASIN: B06XBRGGZ3
  • UPC: 712038496679
 - ComposiMold Used 3lbs Reusable Mold Making
ComposiMold Used 3lbs Reusable Mold Making

Filtered Used ComposiMoldHere is a change in the paradigm! ComposiMold is re-usable after all! You can buy used, but filtered, ComposiMold that you can melt and re-use for your own molding and casting applications.ComposiMold is a 100% reusable mold making material that works by melting and pouring. Many casts can be made using the same mold. ComposiMold is good for the mold maker and craft artist because it can be reused to make different molds without worrying about wasting mold making material. ComposiMold is an excellent material for those wanting to learn and become involved in sculpting, modeling, and mold making without having to worry about mistakes or wasting material. ComposiMold is a flexible, rubbery, thermoplastic that is great for small mold parts using many different casting materials including plaster, cement, epoxy, polyurethane, and many others.Used ComposiMold has been filtered but still may contain small particles. Just like new ComposiMold Used ComposiMold can be re-melted many times with proper care. All used ComposiMold is sold in cube form, you must provide your own microwave safe container.Used ComposiMold is Not for the Food Contact Version.Supply of used ComposiMold is limited.Q. How many times has used ComposiMold been used?A. 1-3 times. Most of the us...

  • Color: Amber
  • Brand: ComposiMold
  • ASIN: B01NBMEKWA
 - Polly Plastics Silicone Molding Putty - 1/2 Lb - for Moldable Plastic | Wax | Clay | Urethane and Epoxy Resins | Plaster
Polly Plastics Silicone Molding Putty - 1/2 Lb - for Moldable Plastic | Wax | Clay | Urethane and Epoxy Resins | Plaster

Make your own Reusable Molds - the Fast and Easy way Polly Plastics Silicone Mold Putty is an easy way to make fast reliable molds that you can re-use multiple times. Just knead equal amounts of A (white) and B (blue) together and create a silicone mold by forming the putty around the object you want to replicate. Use it for soap molds, candle molds, antique furniture repair, small impression molding, jewelry making and repair, and other small object casting. You can cast many types of materials in your finished mold including moldable plastics, waxes, clays, urethane and epoxy resins and plaster. Fast Curing and Durable Our putty is non-toxic and odor free. It will handle heat up to 450 F. You have 4 minutes of working time and you are able to de-mold in 30 minutes. Self-releasing - no mold release agent required for most applications. Long shelf life, no shrinkage. Not intended for food contact applications. This package contains .25 lbs. of Part A and .25 lbs. of Part B. Made in USA. Complete instructions. Keep out of reach of children. Frequently Asked Questions Can I use it to make a dental in-print? It is non-toxic but it is not approved for FDA-type applications like food contact or internal use. What materials can you fill the mold with? All common casting material...

  • Brand: Polly Plastics
  • ASIN: B018B4A6X2
  • UPC: 683405247227
 - Environmental Technology 1/2-Pound Kit Casting' Craft Easymold Silicone Putty
Environmental Technology 1/2-Pound Kit Casting' Craft Easymold Silicone Putty

Easymold silicone putty is ideal for a wide range of impression type mold applications, including castin'craft clear casting resin, easycast clear casting epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. Easymold is an easy to use, odor free, non-toxic, fda compliant - food grade, two component silicone putty.

  • Color: Clear
  • Brand: Environmental Technology
  • ASIN: B004Y46GX8
  • UPC: 033331337002
 - Mold Star 30 Silicone Mold Making Rubber - Trial Unit
Mold Star 30 Silicone Mold Making Rubber - Trial Unit

Mold Star® rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star® silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star® silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star® will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star® rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX® is NOT compatible with Mold Star® rubbers. MOLD STAR 30: MIX RATIO: 1:1 by volume; POT LIFE: 45 mins; DEMOLD TIME: 6 hrs; SHORE A: 30; COLOR: Green Read the MSDS before using. Consult the Technical Bulletin for further information or visit us at www.smooth-on.com

  • Color: Blue
  • Brand: Smooth-On
  • ASIN: B00ETAY8RI
  • UPC: 751635227415
 - Super Soft Platinum Silicone - Trial Units
Super Soft Platinum Silicone - Trial Units

Ecoflex® Rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex® Rubbers are mixed 1A:1B by weight or volume and cure at room temperature with negligible shrinkage. Rubber also cures without a "tacky" surface. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very "stretchy", stretching many times its original size without tearing and will rebound to its original form without distortion. Ecoflex® Rubbers are water white translucent and can be color pigmented with Silc-Pig® pigments for creating a variety of color effects. Ecoflex® 5 - Shore 5A hardness (available only in 400 ML cartridges) Ecoflex® 00-50 - Shore 00-50 hardness (below the Shore A scale) Ecoflex® 00-30 - Shore 00-30 hardness Ecoflex® 00-20 - Shore 00-20 hardness Ecoflex® 00-10 - Shore 00-10 hardness (extremely soft)

  • Color: Clear
  • Brand: Smooth-On, Inc.
  • ASIN: B00CA5VY3U
  • UPC: 751635863415
 - Smooth-On Rebound 25 Brush On Trial Unit Platinum Silicone Moldmaking Rubber
Smooth-On Rebound 25 Brush On Trial Unit Platinum Silicone Moldmaking Rubber

Rebound 25 is an easy-to-use platinum-cure silicone rubber that self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound 25 can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a soft, flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc. Adult Supervision Required. Keep Out of the Reach of Children.

  • Color: Orange
  • Brand: Smooth-On
  • ASIN: B00EFEK8BS
  • UPC: 751635868113
 - Alumilite Amazing Mold Rubber Kit, 0.77 oz.
Alumilite Amazing Mold Rubber Kit, 0.77 oz.

Alumilite Amazing Mold Rubber Kit, 0.77 oz.

  • Color: White
  • Brand: Alumilite
  • ASIN: B00FD8H08O
  • UPC: 683203544108

Silicone Mold Making B343 Search Results

Looking for more Silicone Mold Making similar ideas? Try to explore these popular searches: Clorox Surface Cleaner, Cut Signature Edition Baseball, and Flea Killer Spray.

Look at Silicone Mold Making Video Reviews

Choosing the Correct Mold Making Material - Make It Artsy

Silicone Mold Making Review

Choosing the correct mold making product can be confusing. Joe Rotella and Julie Fei Fan Balzer d...

Tags: mold making,amazing casting products,amazing mo...

Making Molds With EasyMold Silicone Putty

Silicone Mold Making Review

Mylene Hillam shows you how to make your own molds in minutes with EasyMold Silicone Putty. She s...

Tags: Silicone Mold,Mold Making,EasyMold,Silicone Put...

How to Make Silicone Molds (A MUCH better updated version)

Silicone Mold Making Review

My other two silicone making videos are incredibly long and I ramble on and on about every little...

Tags: resin,resin mold,resin molds,update,resin updat...

How to Make Your First Mold and Cast with a Silicone Starter Kit

Silicone Mold Making Review

Mold Making with OOMOO 30 Silicone Rubber from Smooth-On. Learn how to make a simple mold and cas...

Tags: liquid plastic,resin,urethane,smoothon,molding,...

Make Your Own Silicone Mold From Caulking & Dish Soap!

Silicone Mold Making Review

The cheapest & easiest way to make your own silicone molds! I decided to put this method to the t...

Tags: mold making,diy,silicone molds,silicone mold ma...

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com