Compare Prices

Performance Fuel Injection Controller


 - Dobeck Performance Harley Davidson Fuel Injection Controller Big Twin Models 1995-2005 EJK 9120265
Dobeck Performance Harley Davidson Fuel Injection Controller Big Twin Models 1995-2005 EJK 9120265

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3 fits 1995-2005 HD Big Twin Models. EJK Gen 3 vs Gen 3.5: the Gen 3 adds fuel to stock while the Gen 3.5 can add & pull fuel from the stock fuel curve. The Gen 3 is an adequate fuel solution in most cases. The Gen 3.5 is necessary when the vehicle is running overly rich or you plan to add performanc...

  • Brand: Dobeck Performance
  • ASIN: B00XIGT2TS
 - Dobeck Performance Harley Davidson Fuel Injection Controller VROD 2002-2007 EJK 9120269
Dobeck Performance Harley Davidson Fuel Injection Controller VROD 2002-2007 EJK 9120269

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3 fits 2002-2007 HD VROD. EJK Gen 3 vs Gen 3.5: the Gen 3 adds fuel to stock while the Gen 3.5 can add & pull fuel from the stock fuel curve. The Gen 3 is an adequate fuel solution in most cases. The Gen 3.5 is necessary when the vehicle is running overly rich or you plan to add performance mods that...

  • Brand: Dobeck Performance
  • ASIN: B00XIGSHBW
 - Dobeck Performance Yamaha V-Star Yamaha Bolt Fuel Injection Programmer EJK 9120291
Dobeck Performance Yamaha V-Star Yamaha Bolt Fuel Injection Programmer EJK 9120291

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3 fits 2009-2016 Yamaha V-Star 950 and 2014-2017 Yamaha Bolt.

  • Brand: Dobeck Performance
  • ASIN: B00XIGSF8C
 - Dobeck Performance Yamaha FZ-07 Fuel Injection Programmer 2015-2017 EJK 8120147
Dobeck Performance Yamaha FZ-07 Fuel Injection Programmer 2015-2017 EJK 8120147

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3.5 fits the 2015-2017 Yamaha FZ-07 / MT-07.

  • Brand: Dobeck Performance
  • ASIN: B00XIGTJDC
 - Can Am Outlander 1000 500 650 800 Fuel Injection Programmer EJK 9320101
Can Am Outlander 1000 500 650 800 Fuel Injection Programmer EJK 9320101

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3 fits the 2011-2017 Can Am Outlander 1000 and 2006-2015 Can Am Outlander 500/650/800 and 2016-2017 Can Am Outlander 650. EJK Gen 3 vs Gen 3.5: the Gen 3 adds fuel to stock while the Gen 3.5 can add & pull fuel from the stock fuel curve. The Gen 3 is an adequate fuel solution in most cases. The Gen 3...

  • Brand: Dobeck Performance
  • ASIN: B00XIGTA2W
 - The ADJUSTER: In-cab Fuel Controller for 12 Valve Cummins P7100 Pump (formerly Attitude Adjuster)
The ADJUSTER: In-cab Fuel Controller for 12 Valve Cummins P7100 Pump (formerly Attitude Adjuster)

The ADJUSTER by Attitude (formerly Attitude Adjuster) gives you FULL fuel control of your 12-valve Cummins or any other engine equipped with a Bosch P7100 injection pump without leaving your seat. It's a precise mechanical system with accurate command of range and fuel output. From Optimum Economy to Max Power on the fly. US Patent #10/054,060. AWESOME---Does it all!> Provides FULL & precise fuel control of your 12-v Cummins ('94 - '98) or any engine with a p-7100 pump> Adds Power: 10+% increase.> Increases Fuel Economy: 10-25% increases in mpg.> Lowers EGT's: 200-250 degrees in the mid ranges.> Longer Pump Life: great for highly modified or large pumps. Can defuel to under 150 cc's.> Full rack travel> Controls Smoke> Easy Installation: 30-60 minutes Using the 3" in-cab controller, you have full precise adjustability with 8 dial settings and mid settings (16 total) through the fuel spectrum with only one rotation of the knob. This lets you reproduce the exact repeatable fuel setting every time for efficient, consistent operation. All of this is done while retaining the AFC housing (boost advance) which is crucial for drivability. The ADJUSTER - improves the performance of trucks from stock to highly modified. - is flow-bench and dyno proven. - housing comes pre-machined for the s...

  • Brand: Attitude Performance Products
  • ASIN: B07LCV3PDY
 - AEM (30-3305) V2 Multi-Input Water/Methanol Injection Standard Controller Kit
AEM (30-3305) V2 Multi-Input Water/Methanol Injection Standard Controller Kit

AEM's Multi-Input water/methanol injection controller features a multiple input design that enables users to install it on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5 volt voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5 voltage-based MAF. The controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness's positive-lock connector. The Multi-Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5 volt and frequency based settings. The controller housing features an easy to access integrated fuse and molded mounting tabs. AEM's engineers spent extensive time developing the controller's flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine's need for water/methanol in...

  • Brand: AEM
  • ASIN: B00GSIBC4G
  • UPC: 840879022693
 - Honda Grom Fuel Injection Programmer 2014-2017 EJK 8110049
Honda Grom Fuel Injection Programmer 2014-2017 EJK 8110049

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3.5 fits the 2014-2017 Honda Grom / MSX 125.

  • Brand: Dobeck Performance
  • ASIN: B00XIGTF2W
 - AEM (30-3306) V2 Water/Methanol Injection HD Controller Kit with Internal MAP Sensor
AEM (30-3306) V2 Water/Methanol Injection HD Controller Kit with Internal MAP Sensor

AEM's Boost Dependent HD turbo Diesel Controller has an on-board MAP sensor (up to 40 PSI) with a molded-in nipple for a boost hose pickup. The controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness's positive-lock connector. The Boost Dependent controller housing includes a wiring legend on the back, easy to access integrated fuse and molded mounting tabs. AEM's engineers spent extensive time developing the controller's flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine's need for water/methanol injection, which further optimizes charge air cooling and EGT reduction on turbo Diesels. AEM's Water/Methanol Injection wiring harness for the Boost Dependent HD turbo Diesel controller is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the syste...

  • Brand: AEM
  • ASIN: B00GSIBDJK
  • UPC: 840879022709
 - AEM 30-3304 AEM30-3304
AEM 30-3304 AEM30-3304

AEM's Boost Dependent water/methanol injection controller is ideal for vehicles running up to 35 PSI of boost. It has an on-board manifold absolute pressure (MAP) sensor with a molded-in, barbed nipple for a boost hose pickup. The controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness's positive-lock connector. The Boost Dependent controller housing includes a wiring legend on the back, easy to access integrated fuse and molded mounting tabs. AEM's engineers spent extensive time developing the controller's flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine's need for water/methanol injection, which further optimizes charge air cooling and detonation control on gasoline engines or EGT reduction on turbo Diesels. AEM's Water/Methanol Injection wiring harness for the Boost Dependent 35 PSI controller is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness whi...

  • Color: black
  • Brand: AEM
  • ASIN: B00GSIB57K
  • UPC: 840879022686

Performance Fuel Injection Controller Q184 Search Results

Looking for more Performance Fuel Injection Controller similar ideas? Try to explore these popular searches: Rejuvenating Facial Cleanser, Solid Copper Conductor, and Pinstripe Pure Series.

Look at Performance Fuel Injection Controller Video Reviews

Motorcycle Fuel Injection Controllers Explained - How They Work and What You Need by J&P Cycles

Performance Fuel Injection Controller Review

We'll show you fuel injection controllers that you'll need if you are making changes to your exha...

Tags: auto tune,EFI,controllers,ECM replacement,tunin...

AEM FIC Fuel Injection controller for racing and high perf.

Performance Fuel Injection Controller Review

AEM Fuel Ignition Controller. Ideal for turbo charged or modified fuel injected cars. ****Che...

Tags: AEM,Riceboytv,FIC,Fuel,Ignition,Controller,Inta...

Adjusting the EJK (Electronic Jet Kit) Fuel Controller

Performance Fuel Injection Controller Review

Thank you for watching this Dobeck Performance Tutorial! The Electronic Jet Kit (EJK) is the #1 ...

Tags: Fuel injection,dirtbike,electronic jet kit,Stag...

Dobeck Performance EFI controllers - Compare AFR+ to EJK to TFI

Performance Fuel Injection Controller Review

Dobeck Performance GM, Dallas Fischer, explains the differences in their generations of EFI contr...

Tags: performance add-ons,fuel injection controller,P...

Programming, Testing, & Flashing Split Second AUX. Fuel System Controller

Performance Fuel Injection Controller Review

This video demonstrates how to test your port injection or throttle body injection Auxiliary Fuel...

Tags: Mazdaspeed,Mazdaspeed 3,Mazdapseed 6,Focus ST,F...

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com