Compare Prices

Membrane Filter Holder


 - Advantec 662322 Polypropylene Filter Holder for 47-mm membranes
Advantec 662322 Polypropylene Filter Holder for 47-mm membranes

Use these polypropylene (PP) holders for ultra cleaning and sterilizing liquids under pressure, or for aseptic sampling of liquids and gases. Maximum operating temperature (liquids) is 176°>F (80°>C). holders feature PP dual support screens and silicone O-Rings. Dual support screens allow for flow in both directions. Assemble holders quickly and efficiently without membrane tears with the specially designed Inlet cap and exterior lock. Maximum operating pressure is 71 psi (4.8 bar). the 47-mm holder features a 1/4 inch NPT) on the Inlet and Outlet. Also has a female LUER-SLIP fitting included. Autoclavable.

  • Color: Blue
  • Brand: Advantec
  • ASIN: B00NG1ZHM6
 - Syringe Filter, Membrane Solutions Lab Supply Filter PES, 0.22 Micron Pore Size, 25mm Diameter, Pack of 10
Syringe Filter, Membrane Solutions Lab Supply Filter PES, 0.22 Micron Pore Size, 25mm Diameter, Pack of 10

MS Lab Supply PES Syringe Filter The structure design of the needle filter product is precise, which ensures smooth filtration, rationalization of internal space and low residual rate, thereby reducing sample waste. The needle filter has threads on the edge to play a non-slip effect. The user-friendly design allows the operator to be comfortable. The stability of the filter membrane in the needle filter and the zero difference between batch and batch ensure the consistency of the analysis results Needle Filter Luer connector with catch to prevent over-pressure filter from flying out Specifications: Filter Medium: PES Diameter(mm): 25 Pore Size(μm): 0.22 Wettability: Hydrophilic Sterile: No Prefilter: No Filtration Area(cm²): 2.98 Housing Material: PP Holdup-Volume(μl):

  • Brand: Membrane Solutions Lab Supply
  • ASIN: B07D4F96SC
  • UPC: 799899549379
 - Advantec 43303010 Polypropylene Filter Holder for 25-mm membranes
Advantec 43303010 Polypropylene Filter Holder for 25-mm membranes

Use these polypropylene (PP) holders for ultra cleaning and sterilizing liquids under pressure, or for aseptic sampling of liquids and gases. Maximum operating temperature (liquids) is 176°>F (80°>C). holders feature PP dual support screens and silicone O-Rings. Dual support screens allow for flow in both directions. Assemble holders quickly and efficiently without membrane tears with the specially designed Inlet cap and exterior lock. Maximum operating pressure is 42 psi (2.9 bar). the 25-mm holder features a female Luer-Lock on the Inlet and a male LUER-SLIP on the Outlet. Autoclavable.

  • Color: White
  • Brand: Advantec
  • ASIN: B00NG1ZN84
 - D DOLITY 1000ml Filtration Apparatus Vacuum Lab Filtering Unit Flask Funnel and Clamp, Compatible with 42-60mm Membrane Filter Paper
D DOLITY 1000ml Filtration Apparatus Vacuum Lab Filtering Unit Flask Funnel and Clamp, Compatible with 42-60mm Membrane Filter Paper

We sell 100% brand new and high quality products. You can get what you want here at a competitive price! Don't hesitate, just buy it!Description: - Made of high-quality borosilicate glass, which is strong, durable and heat-resistant - Provides a Lab Filtration Unit, including a 1000mL filter flask, a 300mL graduated funnel and an aluminum clamp - Be compatible with 42-60mm membrane filter paper - Commonly used in industrial and academic laboratories for filtering particles, bacteria and other substances - Good pressure and sealing performance, all according to international standardsSpecification: - Materials: borosilicate glass, rubber, aluminum - Diameter of Sand Cone: 40mm, 40mm is also the inner diameter of the filter joint. So you have to choose the membrane filters of larger size than Diam. 40mm. - Filter Flask Capacity: 1000ml - Graduated Funnel Capacity: 300ml (50mL graduations for quick, easy measurement) - Height of Flask: 23cm - Bottom Diameter of Flask: 13.5cm, - Height of Funnel: 12cm - Funnel Top Diameter: 8cm; the filter is 12cm high.Package Includes:1 Piece 1000mL filter flask1 Piece 300mL graduated funnel with lid1 Piece aluminum clamp (above 3 pcs are all packed in one box)Note:The item does not include filter membrane papers, please purchase separately. Diam. 5...

  • Color: White
  • Brand: D DOLITY
  • ASIN: B07GBVF729
  • UPC: 034722500678
 - SDI-FH2 - SDI Filter Holder for SDI-2000 Kit for Silt Density Index Testing | Holds 47mm Filter Discs | APPLIED MEMBRANES
SDI-FH2 - SDI Filter Holder for SDI-2000 Kit for Silt Density Index Testing | Holds 47mm Filter Discs | APPLIED MEMBRANES

SDI Filter Holder for SDI Test Kits (Silt Density Index Testers) Replacement filter holder for use in SDI testers - holds 47 mm filter discs. The exterior locking ring design allows the unit to be assembled quickly and efficiently without tearing the membrane, while the dual silicone o-ring design prevents leaking. - Inlet: 1/4" Male Threads (MNPT)- Outlet: Combination 1/4" MNPT with detachable female luer-slip fitting- Maximum inlet/differential pressure: 71 psi (0.49 MPa)- Maximum Operating Pressure: 176°F (80°C)- Body and Support Screen: Polypropylene- O-Rings: Silicone- For Filter Disc Size: 47 mm- Dimensions: 2.6" Dia. x 2" H- Filter Holder for SDI-2000 (SDI Kit) - Model SDI-FH2 -Easy to use uique lock ring design assures proper sealing -Conforms with EPA Method 1311 for Toxicity Characteristic Leaching Procedure, 40 CFR, Part 261, 1991 Hazardous Waste Compliance Guide

  • Color: Blue and White
  • Brand: APPLIED MEMBRANES INC.
  • ASIN: B004BNUGGK
 - Membrane Solutions Lab Supply Syringe Filter Hydrophilic PTFE Membrane 0.22 Micron Pore Size,13mm Diameter, Pack of 10
Membrane Solutions Lab Supply Syringe Filter Hydrophilic PTFE Membrane 0.22 Micron Pore Size,13mm Diameter, Pack of 10

MS Lab Supply Syringe Filter PTFE Membrane 0.45 Micron Pore Size 13mm Diameter The structure design of the needle filter product is precise, which ensures smooth filtration, rationalization of internal space and low residual rate, thereby reducing sample waste. The stability of the filter membrane in the needle filter and the zero difference between batch and batch ensure the consistency of the analysis results Needle Filter Luer connector with catch to prevent over-pressure filter from flying out Specifications: Filter Medium: PTFE Diameter(mm): 13 Pore Size(μm): 0.22 Wettability: Hydrophilic Sterile: No Prefilter: PP Filtration Area(cm²): 0.92 Housing Material: PP Holdup-Volume(μl):

  • Brand: Membrane Solutions Lab Supply
  • ASIN: B07G335YZF
  • UPC: 663577842307
 - Whatman 420100 Polycarbonate Pop-Top Syringe-Type Reusable Membrane Filter Holders, 13mm Membrane, 2.7cm OD x 2.7cm Height (Pack of 10)
Whatman 420100 Polycarbonate Pop-Top Syringe-Type Reusable Membrane Filter Holders, 13mm Membrane, 2.7cm OD x 2.7cm Height (Pack of 10)

These Pop-Top plastic membrane filter holders are designed for microfiltration and ultra cleaning of small volumes of liquids using positive pressure. They easily accommodate Nuclepore track-etched and cast membranes. Polycarbonate holder. Male luer slip-fit cap with a female luer slip-fit base. Membrane: 13mm. Prefilter: 10mm. Filtration Area: 0.8 sq cm. Size: 2.7OD x 2.7H. 10/Pack. Whatman #: 420100.

  • Brand: Whatman
  • ASIN: B00394F5WC
 - Whatman 1960-004 Borosilicate Glass Vacuum Type Membrane Filter Holder, 47mm Diameter, 300mL Capacity
Whatman 1960-004 Borosilicate Glass Vacuum Type Membrane Filter Holder, 47mm Diameter, 300mL Capacity

This Whatman filter holder is for use with a 47mm membrane filters. Produced from borosilicate glass and available with a choice of support screen. Suitable for aqueous and organic solvent filtration. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane. The sintered glass support is recommended for filtration and biological analysis. The 304 stainless steel support screen is suitable for use with proteinaceous solutions. Applications include: general laboratory microfiltration, quality control and sterility testing, removal of particulates from HPLC solvents, and tissue culture media filtration. Capacity: 300ml. Per each. Whatman #: 1960-004.

  • Brand: Whatman
  • ASIN: B00394FCZW
 - Syringe Filter, Membrane Solutions Lab Supply Filter CA,0.45 Micron Pore Size, 13mm Diameter, Pack of 10
Syringe Filter, Membrane Solutions Lab Supply Filter CA,0.45 Micron Pore Size, 13mm Diameter, Pack of 10

MS Lab Supply CA Syringe Filter CA membrane Syringe Filter with low protein adsorption and natural hydrophilicity; the best choice for aqueous biology and protein filtration CA Syringe Filter are widely used for protein filtration and determination of surface water (since the acetate membrane does not contain nitrogen) Specifications: Color: blue Filter Medium: CA Diameter(mm): 13 Pore Size(μm): 0.45 Wettability: Hydrophilic Sterile: No Prefilter: No Filtration Area(cm²): 0.92 Housing Material: PP Holdup-Volume(μl):

  • Brand: Membrane Solutions Corp
  • ASIN: B07BSD4FGL
  • UPC: 664271774772
 - Whatman 1980-001 Stainless Steel Membrane Filter Holder Syringe Filter Type, 13mm Diameter
Whatman 1980-001 Stainless Steel Membrane Filter Holder Syringe Filter Type, 13mm Diameter

These Whatman membrane filter holders are equipped with luer lock fittings which connect to a standard syringe. They offer convenience and ease of use for clarification, sterilization and removal of particulates from small volumes of liquid (e.g., HPLC samples and solvents). PTFE gaskets and O-ring permit autoclaving of the membrane in place without the filter sticking to the holder. Female luer inlet; male luer nozzle outlet. Fits 13mm membrane filters. 1/Pack. Whatman #: 1980-001.

  • Brand: Whatman
  • ASIN: B00394FD1U
 - Syringe Filter, Membrane Solutions Lab Supply Sterile Filter Nylon, 0.22 Micron Pore Size, 13mm Diameter, Pack of 10
Syringe Filter, Membrane Solutions Lab Supply Sterile Filter Nylon, 0.22 Micron Pore Size, 13mm Diameter, Pack of 10

MS Lab Supply Sterile Nylon Syringe Filter Nylon membrane with hydrophilic, high protein binding, and high dirt holding capacity, suitable for protein-free aqueous solutions and organic solutions, etc., resistant to alcohol and DMSO. Nylon Syringe Filter are widely used in various analytical processes. The good physical properties of nylon can meet the demanding analysis requirements of various test conditions. Specifications: Color: yellow Filter Medium: Nylon Diameter(mm): 13 Pore Size(μm): 0.22 Wettability: Hydrophilic Sterile: Yes Prefilter: Glass fiber Filtration Area(cm²): 1.09 Housing Material: PP Holdup-Volume(μl):

  • Brand: Membrane Solutions Corp
  • ASIN: B07D2BMSFL
  • UPC: 799899529326
 - Whatman 1980-002 Stainless Steel Syringe Filter Type Membrane Filter Holder, 25mm Diameter
Whatman 1980-002 Stainless Steel Syringe Filter Type Membrane Filter Holder, 25mm Diameter

These Whatman membrane filter holders are equipped with luer lock fittings which connect to a standard syringe. They offer convenience and ease of use for clarification, sterilization and removal of particulates from small volumes of liquid (e.g., HPLC samples and solvents). PTFE gaskets and O-ring permit autoclaving of the membrane in place without the filter sticking to the holder. Female luer inlet; male luer nozzle outlet. Fits 25mm membrane filters. 1/Pack. Whatman #: 1980-002.

  • Brand: Whatman
  • ASIN: B00394FD24
 - Advantec MFS 43303010 Model Pp25 Syringe Filter Holder, 25 mm Diameter (Pack of 6)
Advantec MFS 43303010 Model Pp25 Syringe Filter Holder, 25 mm Diameter (Pack of 6)

Thermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and support screen material is PP. Units come standard with silicone O-rings. Replacement parts and alternate O-rings in FPM and EPR materials are available. Inlet: Luer-lock. Outlet: Luer slip. Use hand tightening only. Autoclavable.

  • Brand: ADVANTEC MFS
  • ASIN: B01N7MVLSN
 - Whatman 420400 Polycarbonate Swin-Lok Syringe-Type Reusable Membrane Filters Holders, 47mm Diameter, 6.0cm OD x 6.5cm Height (Pack of 8)
Whatman 420400 Polycarbonate Swin-Lok Syringe-Type Reusable Membrane Filters Holders, 47mm Diameter, 6.0cm OD x 6.5cm Height (Pack of 8)

These Swin-Lok plastic membrane filter holders are designed for microfiltration and ultra cleaning of small volumes of liquids using positive pressure. They easily accommodate Nuclepore track-etched and cast membranes. Syringe compatible. Polycarbonate holder. Female luer slip-fit cap with a male 1/4inch NPT and 1/4inch tubing (multipurpose) base. Membrane: 47mm. Prefilter: 42mm. Filtration Area: 13.8 sq cm. Size: 6.0 OD x 6.5 H. 8/Pack. Whatman #: 420400.

  • Brand: Whatman
  • ASIN: B00394F5WW
  • UPC: 024144929799
 - Whatman 1960-054 Stainless Steel Vacuum Type Membrane Filter Holder, 47mm Diameter, 300mL Capacity
Whatman 1960-054 Stainless Steel Vacuum Type Membrane Filter Holder, 47mm Diameter, 300mL Capacity

This Whatman filter holder is for use with a 47mm membrane filter. 47mm membrane filters. Produced from stainless steel and available with a choice of support screen. Suitable for aqueous and organic solvent filtration. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane. The 304 stainless steel support screen is suitable for use with proteinaceous solutions. Applications include: general laboratory microfiltration, quality control and sterility testing, removal of particulates from HPLC solvents, and tissue culture media filtration. Capacity: 300ml. Per each. Whatman #: 1960-054.

  • Brand: Whatman
  • ASIN: B00394FD1K
 - Watts Premier 560018 50 GPD Membrane, 1-Pack
Watts Premier 560018 50 GPD Membrane, 1-Pack

Watts Premier Reverse Osmosis Membranes utilize an internal check valve, so make sure to use only Watts Premier replacement RO Membranes (yellow outer wrapping tape color) for your RO Systems. Watts Premier engineers are constantly working to provide a superior long lasting quality product to you our customers. Since Premier has RO Systems out in the marketplace since 1988, we noticed that check valves, typically placed in the elbow of the system, have a tendency to wear out over time. A RO system with a faulty check valve will become less efficient by running constantly. By placing the check valve in to the membrane, you are assured constant efficient performance due to the periodic replacement of this critical component of the RO system. Using Filmed sheeting, the Watts Premier Membranes are compatible with Premier as well as all standard reverse osmosis systems. This semi permeable membrane effectively reduces TDS and sodium as well as a wide range of contaminants such as Arsenic, Lead, Percolate, Chromium, Copper, Radium and Protozoan Cysts, such as Giardia and Cryptosporidium. The heart of your Reverse Osmosis system reduces impurities down to 1/10,000 of a micron. Fits 5SV, 4SV, Manifold and Zero Waste systems.

  • Brand: Watts Premier
  • ASIN: B00EZGF99W
  • UPC: 696750375538
 - Syringe Filter, Membrane Solutions Lab Supply Filter CA,0.22 Micron Pore Size, 13mm Diameter, Pack of 10
Syringe Filter, Membrane Solutions Lab Supply Filter CA,0.22 Micron Pore Size, 13mm Diameter, Pack of 10

MS Lab Supply CA Syringe Filter CA membrane Syringe Filter with low protein adsorption and natural hydrophilicity; the best choice for aqueous biology and protein filtration CA Syringe Filter are widely used for protein filtration and determination of surface water (since the acetate membrane does not contain nitrogen) Specifications: Color: blue Filter Medium: CA Diameter(mm): 13 Pore Size(μm): 0.22 Wettability: Hydrophilic Sterile: No Prefilter: No Filtration Area(cm2): 0.92 Housing Material: PP Holdup-Volume(μl):

  • Brand: Membrane Solutions Corp
  • ASIN: B07BSCP8DN
  • UPC: 664271772242
 - Syringe Filters Nylon 25mm Diameter 0.45um Pore Size non Sterile Pack of 100 by Biomed Scientific
Syringe Filters Nylon 25mm Diameter 0.45um Pore Size non Sterile Pack of 100 by Biomed Scientific

• Feature: filter diameter: 25mm, pore size: 0.45um, membrane material: nylon hydrophilic property , no need to moist beforehand, uniform aperture , strong tenacity and adsorb ability syringe filters for cell culture provide effective filtration for a wide variety of sample types designed with a female luer-lok inlet and male luer-slip outlets • Application: electric semiconductor industrial water filtration, chemicals filtration , beverage filtration. • Biomed Scientific syringe filters offer universal application for analytical procedures. Hydrophilic nylon is ideal for aqueous (non-acidic) or organic sample PREP and HPLC, GC or dissolution sample analysis. With its excellent flow characteristics, very low extractable levels and mechanical stability, nylon offers the best combination of physical parameters to meet the most stringent analytical needs. The naturally hydrophilic, high protein binding and high dirt loading capacity of nylon are natural advantages we have other wide varieties of syringe filters which are made with a wide variety of membrane types and sealed without glue to maintain the purity of the filtered sample.

  • Color: Nylon 25mm 0.22?m 100/pk
  • Brand: Biomed Scientific
  • ASIN: B01N5Y885P
  • UPC: 611040202233

Membrane Filter Holder S757 Search Results

Looking for more Membrane Filter Holder similar ideas? Try to explore these popular searches: Bottom Case Screw, Redskins Earrings, and Ray Ban Tortoise Frame.

Look at Membrane Filter Holder Video Reviews

Filter Holder Plate and Interchangeable Filter Holder

Membrane Filter Holder Review

Easily add and remove optical filters from any cage system setup after viewing this quick demonst...

Tags: edmund optics,eo,edmund,optics,optical cage sys...

Sterifilt, a sterile, single use membrane filter

Membrane Filter Holder Review

Sterifilt, a sterile, single use membrane filter that withholds virtually all harmful insoluble p...

Tags: Sterifilt harm reduction,drug filtration,pharm...

Build Your Own Multi-Stage Filter Holder

Membrane Filter Holder Review

Savillex offers pre-assembled filtration units in our most popular configurations for your in-lin...

Tags: Savillex,Filter Holder,Multi-Stage,Filtration U...

How to make a silicone gasket (membrane) DIY

Membrane Filter Holder Review

Silicone gaskets: http://ali.pub/rxb40 Silicone sealants: http://ali.pub/vskhi Homemade elastic g...

Tags: how to make your own silicone gasket,how to mak...

Spiral helix turbulence promoter for membrane filtration

Membrane Filter Holder Review

Notice: This method can be used to 3D print similar spiral helix object too! 3D printing is my ho...

Tags: spiral,helix,turbulence promoter,designspark,3d...

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com