Compare Prices

Ls1 Ssi Intake Manifold


 - Professional Products 52060 Polished LS1 EFI Manifold
Professional Products 52060 Polished LS1 EFI Manifold

Professional Products Polished LS1 EFI Manifold features a polished finish. This manifold is the result of over one year of development and testing and has proven to provide significant increases in power. In direct comparison dyno tests against a factory LS6 intake manifold, the Typhoon produced 17.7 more horsepower at 6,200 RPM. It also makes more power and torque at low and mid-range engine speeds than other aftermarket manifolds. This design features a larger plenum volume, which makes the manifold suitable for larger displacement engines. The manifold has nitrous bosses positioned on the port runners and a 85 millimeter inlet. The manifold kit includes high volume fuel rails with stainless steel mounting brackets, stainless hardware, and a -6 AN stainless braided crossover hose. Additional fittings are also supplied that allows a connection to the stock fuel inlet line.

  • Brand: Professional Products
  • ASIN: B001FTG8QU
  • UPC: 665053520600
 - A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black
A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black

A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black100% TIG Welded AluminumHardware Included3mm (1/8") Thick T6061 Sheet Aluminum ConstructionBlack Fuel RailsFuel Crossover LineIntake is about 2" taller than stockThis intake fits Cathedral Style LS1 LS2 LS6 4.8/5.3/5.7/6.0 Heads.FEATURES: Black Intake Manifold, Black Throttle Body, Gaskets, Hardware, Black Fuel Rails, and Fuel Crossover Line. Works on CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2) A-Team Performance parts are sold exclusively by Southwest Performance Parts.

  • Brand: A-Team Performance
  • ASIN: B076Z97CCW
 - BBK 5004 Compatible with Chevrolet GM LS1 High Performance SSI Series Intake Manifold - Titanium Silver Powder Coat Finish
BBK 5004 Compatible with Chevrolet GM LS1 High Performance SSI Series Intake Manifold - Titanium Silver Powder Coat Finish

BBK Titanium Silver Powder Coat SSI Intake Manifold for GM LS-1 is an improvement over the factory Z06 Corvette intake manifold. The BBK engineers have designed a unit that delivers 12-15 additional rear wheel horsepower on the already hot Z06 and 18-24 horsepower on the base LS-1 equipped GM models. Such highlights include a standard 85 millimeter straight through design throttle inlet and low restrictive rounded runners for maximum horsepower as well as improved low end torque for great street or strip performance. For additional power gains and value there is also an intake manifold kit with one of BBK 's popular Power Plus series performance throttle bodies.

  • Color: Titanium Silver
  • Brand: BBK Performance
  • ASIN: B000CIRAEE
  • UPC: 197975050045
 - Dewhel Engine LS Series Intake Manifold Bolts Kit SS Stainless Steel For LSX LS1 LS2 LS3 LS6 CAMARO CORVETTE GM
Dewhel Engine LS Series Intake Manifold Bolts Kit SS Stainless Steel For LSX LS1 LS2 LS3 LS6 CAMARO CORVETTE GM

A set of stainless steel intake manifold bolts for GM LS1, LS2, LS3, LS6, and LS7 Engines. These will fit all OEM and many aftermarket intake manifolds including FAST 92 & 102mm. OEM applications include all 1997-2014 Camaro, Firebird, Pontiac GTO, Cadillac CTS-V, and Corvette (excluding LT5 engines)

  • Brand: DEWHEL
  • ASIN: B071S48PQ9
  • UPC: 751499359178
 - VMS RACING RED 10.2mm High Performance Engine SPARK PLUG IGNITION WIRES Wire Set 32829 Compatible with 4.8L 5.3L 6.0L 6.2L VORTEC Chevy Chevrolet GMC Engines (Set of 8 Longer wires for Vortec TRUCKS)
VMS RACING RED 10.2mm High Performance Engine SPARK PLUG IGNITION WIRES Wire Set 32829 Compatible with 4.8L 5.3L 6.0L 6.2L VORTEC Chevy Chevrolet GMC Engines (Set of 8 Longer wires for Vortec TRUCKS)

VMS Racing 10.2mm Spiral Core Chevy & GMC Vortec Engine Truck Spark Plug Wires are Designed to surpass all other ignition wires on the market. Construction from INNER to OUTERMOST LAYER is as follows: All Kevlar Stranded INNER CORE, Ferrite EMI/RFI Suppression Element, Heavy Gauge Stainless Steel Conductor, Conductive Graphite Coating, High Density-High Temperature-High Durometer Pure Silicone Insulation, Fiberglass Braid concluding with a 600-degree Pure Silicone Jacket. All this technology consummating a 10.2mm THICK WIRE that will outperform all other wires at a fraction of the cost. The breakdown of the technology used is: 1- 100% PURE SILICONE insulating jacket is made of TC-1500-HS high strength aerospace silicone rubber. Able to withstand 600 degrees ! PERFECT FOR HEADERS! 2 - LOW RESISTANCE - EMI AND RFI SUPPRESSED: 2.5MM conductor with stainless steel wound at 200 turns per inch. Just .5K OHMS per foot. Lowest Resistance possible while maintaining necessary RFI suppression. NO MORE HEARING YOU ENGINE THROUGH THE RADIO! 3- Stainless Steel TRIPLE crimped terminals snap lock terminals! Most wires are single-crimped, better ones are double crimped, VMS Racing wires are TRIPLE-CRIMPED! NO MORE PULLING THE PLUG BOOT & RIPPING TERMINAL OUT OF THE WIRE! 4- PERMANENTLY BONDED & S...

  • Color: red
  • Brand: VMS RACING
  • ASIN: B01LICOCTS
  • UPC: 746839061941
 - BBK 5018 High Flow Performance Billet Aluminum Fuel Rail Kit for Chevrolet, GM LS1
BBK 5018 High Flow Performance Billet Aluminum Fuel Rail Kit for Chevrolet, GM LS1

BBK Billet Aluminum High-Flow Fuel Rail Kit for GM LS-1 features the "SSI-Series" intake manifold for the 1986-1993 5.0L Mustang. The BBK engineers found that the small steel factory fuel rails leave much to be desired. This resulted in the development of our current high flow aluminum fuel rails that are included in many of our performance intake manifolds as standard equipment. While developing these fuel rails - the BBK team also made sure that these units would work stock or on other aftermarket intake manifolds so enthusiasts could get the same great performance and value that they deliver. It is built from lightweight aluminum where each rail is CNC machined to precise tolerances. It has blue anodized for maximum performance and longevity.

  • Color: Red
  • Brand: BBK Performance
  • ASIN: B001G8MOKY

Ls1 Ssi Intake Manifold M128 Search Results

Looking for more Ls1 Ssi Intake Manifold similar ideas? Try to explore these popular searches: Kawasaki zx9r Specifications, Tab Swing, and Aluminum Jump Rings.

Look at Ls1 Ssi Intake Manifold Video Reviews

BBK Performance SSI Series LS1 Intake Corvette Throttle Body Exhaust Headers Cold Air Intake

Ls1 Ssi Intake Manifold Review

BBK Performance Parts SSI Series LS1 Intake Manifolds Corvette Throttle Body Exhaust Headers Cold...

Tags: JEGS,bbk,performance,parts,ssi,series,ls1,intak...

Slp blackwing, bbk ssi intake , cammed ls1

Ls1 Ssi Intake Manifold Review

Under hood

Tags: Bbk ls1

Custom BBK LS intake part 2

Ls1 Ssi Intake Manifold Review

Tags:

Review: FAST's LSX Manifolds - How to Choose The Right Intake

Ls1 Ssi Intake Manifold Review

An inside look at choosing the correct FAST's high-performance intake manifold for your Chevy LS ...

Tags: LSX,lsxtv,powertv,streetlegal,tv,fast,intake,ma...

2005 Silverado 5.3l with LS1 intake Manifold on Test Stand

Ls1 Ssi Intake Manifold Review

....Gentech Engines is now FOXLINDERS............... Visit http:// www.foxlinders.com----SOLD----

Tags: LS1,5.3,5.3l,Silverado

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com