Compare Prices

Coated Solid Carbide End Mill


 - Kodiak Cutting Tools KODIAK163480 USA Made Solid Carbide End Mill, TiCN Coated, 2 Flute, 1/16
Kodiak Cutting Tools KODIAK163480 USA Made Solid Carbide End Mill, TiCN Coated, 2 Flute, 1/16" Diameter, 1/8" Shank, 1/4" Length of Cut, 1-1/2" Overall Length

1/16 Inch Diameter Solid Carbide End Mill - TICN Coated 1/8" Shank 1/4" Length of Cut 1-1/2" Overall Length 2 Flute Carbide - Coated.

  • Brand: Kodiak Cutting Tools
  • ASIN: B007BTQK9I
  • UPC: 789957143625
 - Cutting Tools Solid Carbide roughing End Mills, HRC45 with Tialn Coated, 4 Flutes, 1/2
Cutting Tools Solid Carbide roughing End Mills, HRC45 with Tialn Coated, 4 Flutes, 1/2" Diameter, 1/2" Shank, 1-1/4" Length of Cut, 3" Overall Length

  • Brand: JERRAY
  • ASIN: B00SXCL0SI
 - JERRAY CNC Carving 3.92 Deg 2 flutes Tapered Angle Ball Tip radius=1.0mm X 1/4
JERRAY CNC Carving 3.92 Deg 2 flutes Tapered Angle Ball Tip radius=1.0mm X 1/4" Shank tungsten Solid Carbide HRC55 with TiAIN Coated

-Type: Tapered angle Ball Nose End Mill / Cone Cutters -Flutes: 2 Flutes -Tip Radius: 1.0mm -Shank Diameter: 1/4"((d1) -Cutting Length: 1-1/4"(L1) -Overall Length: 3"(L) -Single side angle B=3.92°(Approx.) -Coating: TiAIN -Material: imported tungsten carbide -Suitable For:Cutting, end milling, slotting on: aluminum, solid wood,partical board,Hard wood, plywood, etc; -Use top quality imported tungsten steel carbide -Excellent chip removal effect! -High surface finish, excellent work -Long service life Also we have other tip radius tapered endmills: R=0.25x1/4" shank ASIN: B01EMH3846 R=0.75x1/4" shank ASIN: B01EMJKIBU R=1.5x1/4" shank ASIN: B01EVECZGM R=2.0x1/4" shank ASIN: B01EVENNMM

  • Brand: JERRAY
  • ASIN: B015C6CHUC
 - Kodiak Cutting Tools KCT166384 USA Made Solid Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/32
Kodiak Cutting Tools KCT166384 USA Made Solid Premium Carbide End Mill, AlTiN Coated, 4 Flute, 3/32" Diameter, 1/8" Shank, 3/8" Length of Cut, 1-1/2" Overall Length

3/32 Inch Diameter Solid Carbide End Mill - ALTIN Coated 1/8" Shank 3/8" Length of Cut 1-1/2" Overall Length 4 Flute Carbide - ALTiN Coated Diameter Tolerance: +.000"/-.002"Shank Diameter Tolerance: -.0001"/-.0004"ALTIN is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. This coating is extremely heat resistant and can be used with or without coolant. It is exceptional in difficult to machine materials where adhesive wear is particularly high.

  • Brand: Kodiak Cutting Tools
  • ASIN: B0070YYOAG
  • UPC: 789957143397
 - Cobra Carbide 20405 Micro Grain Solid Carbide Long Length General End Mill, TiN Coated, 2 Flute, 30 Degrees Helix, Square End, 1-1/8
Cobra Carbide 20405 Micro Grain Solid Carbide Long Length General End Mill, TiN Coated, 2 Flute, 30 Degrees Helix, Square End, 1-1/8" Cutting Length, 1/4" Cutting Diameter, 3" Length (Pack of 1)

Cobra Carbide general end mill has center cutting geometry. Design for increased chip removal rate. Designed for slotting, profiling and plunging operations. Used for semi-finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. Round shanks allow use with a wide variety of toolholding systems. Work material: nickel/inconel alloy and titanium; good for hardened steel, stainless steel; excellent for aluminum alloy, carbon steel, alloy steel and cast iron.

  • Brand: Cobra Carbide
  • ASIN: B00ECKKXYC
 - Kodiak Cutting Tools KCT166681 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 1/2
Kodiak Cutting Tools KCT166681 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 1/2" Diameter, 1/2" Shank, 1-1/4" Length of Cut, 3" Overall Length

1/2 Inch Diameter Solid Carbide End Mill - ALTIN Coated 1/2" Shank 1-1/4" Length of Cut 3" Overall Length 4 Flute Carbide - Coated.

  • Brand: Kodiak Cutting Tools
  • ASIN: B0070YYPP0
 - Kodiak Cutting Tools KCT166362 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 1/16
Kodiak Cutting Tools KCT166362 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 1/16" Diameter, 1/8" Shank, 1/4" Length of Cut, 1-1/2" Overall Length

1/16 Inch Dia. Solid Carbide End Mill - ALTIN Coated 1/8-Shank 1/4 LOC 1-1/2 OAL 4 Flute Carbide - ALTiN Coated Diameter Tolerance: +.000"/-.002"Shank Diameter Tolerance: -.0001"/-.0004"ALTIN is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. This coating is extremely heat resistant and can be used with or without coolant. It is exceptional in difficult to machine materials where adhesive wear is particularly high.

  • Brand: Kodiak Cutting Tools
  • ASIN: B0070YYO3I
 - Kodiak Cutting Tools KCT166406 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 1/8
Kodiak Cutting Tools KCT166406 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 1/8" Diameter, 1/8" Shank, 1/2" Length of Cut, 1-1/2" Overall Length

1/8 Inch Diameter Solid Carbide End Mill - ALTIN Coated 1/8" Shank 1/2" Length of Cut 1-1/2" Overall Length 4 Flute Carbide - Coated.

  • Brand: Kodiak Cutting Tools
  • ASIN: B0070YYOI8
  • UPC: 787269850804
 - Cobra Carbide 29406 Micro Grain Solid Carbide Regular Length Hi-Performance End Mill, TiAlN Coated, 6 Flute, 45 Degrees Helix, Square End, 3/4
Cobra Carbide 29406 Micro Grain Solid Carbide Regular Length Hi-Performance End Mill, TiAlN Coated, 6 Flute, 45 Degrees Helix, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)

Cobra Carbide hi-performance end mill is manufactured from premium sub micro grain carbide. Multi-flute design allows for less chatter and vibration free operations. Lighter chip load per tooth increases tool life and providing better finish. TiAlN and CG coated for increased tool life. Excellent accuracy. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining"). Round shanks allow use with a wide variety of toolholding systems. Work material: good for aluminum alloy, carbon steel, cast iron; excellent for alloy steel, hardened steel, nickel/inconel alloy, stainless steel and titanium.

  • Brand: Cobra Carbide
  • ASIN: B00ECKDFLU
 - Kodiak Cutting Tools KCT166450 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 3/16
Kodiak Cutting Tools KCT166450 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 3/16" Diameter, 3/16" Shank, 5/8" Length of Cut, 2" Overall Length

3/16 Inch Diameter Solid Carbide End Mill - ALTIN Coated 3/16" Shank 5/8" Length of Cut 2" Overall Length 4 Flute Carbide - Coated.

  • Brand: Kodiak Cutting Tools
  • ASIN: B0070YYOWE
  • UPC: 789957176166
 - JERRAY@ Cutting Tools Solid Carbide roughing End Mills, HRC45 with Tialn Coated, 4 Flutes, 1/4
[email protected] Cutting Tools Solid Carbide roughing End Mills, HRC45 with Tialn Coated, 4 Flutes, 1/4" Diameter, 1/4" Shank, 3/4" Length of Cut, 2" Overall Length

RC-D1/4"-3/4"-D1/4"*2"-4F

  • Brand: JERRAY
  • ASIN: B01ILFUA0A
 - Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55)
Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55)

4Pcs Square Nose End Mill Size: A.1mm Cutter:4 Flutes,Blade Diameter=1mm,Shank Diameter=4mm,Overall length=50mm, B.1.5mm Cutter:4 Flutes,Blade Diameter=1.5mm,,Shank Diameter=4mm,Overall length=50mm, C.2mm Cutter:4 Flutes,Blade Diameter=2mm,,Shank Diameter=4mm,Overall length=50mm, D.3mm Cutter:4 Flutes,Blade Diameter=3mm,Shank Diameter=4mm,Overall length=50mm, Attention: 1.Solid carbide tools offer long tool life and faster cutting speeds than other substrates,but more brittle.make sure work piece and machine are stable,use quality collet chucks,or shrink fit chucks. 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions. 3.Adapt to several kinds of cooling conditions, for example oil mist,water,oil,air cooling.

  • Brand: WKS TOOL
  • ASIN: B01CX2C1D6
  • UPC: 758910615622
 - Kodiak Cutting Tools KCT166582 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 3/8
Kodiak Cutting Tools KCT166582 USA Made Solid Carbide End Mill, AlTiN Coated, 4 Flute, 3/8" Diameter, 3/8" Shank, 1" Length of Cut, 2-1/2" Overall Length

3/8 Inch Diameter Solid Carbide End Mill - ALTIN Coated 3/8" Shank 1" Length of Cut 2-1/2" Overall Length 4 Flute Carbide - Coated.

  • Brand: Kodiak Cutting Tools
  • ASIN: B0070YYPGO
  • UPC: 789957258626
 - Wokesi 4mm Cutting Dia,4mm Shank Dia,75mm OAL,Extra Long Shank,HRC60,4Flutes,AITIN Coated,Solid Tungsten Carbide,Square End Mill Flat Endmills CNC Router Bits(4mmDia×4mmShank×75mmOAL)
Wokesi 4mm Cutting Dia,4mm Shank Dia,75mm OAL,Extra Long Shank,HRC60,4Flutes,AITIN Coated,Solid Tungsten Carbide,Square End Mill Flat Endmills CNC Router Bits(4mmDia×4mmShank×75mmOAL)

1.Widely used in hardness from copper,cast iron,aluminium alloys,titanium alloy,mold steels,stainless steels,alloys steels, tools steels to the high hardness of HRC60 or more processing materials. 2.Sharp cutting edges design and long shank for deep cavity machining. 3.Solid carbide tools offer long tool life and faster cutting speeds than other substrates,but more brittle.Make sure work piece and machine are stable,use hydraulic chucks,high quality collet chucks,or shrink fit chucks. 4.Please adjust the speed,feed and cutting depth according to actual cutting conditions. 5.Tool overhang,please use the required amount of minimum size,amount of long overhang is high vibration,turn it to lower the number of feed. 6.Adapt to several kinds of cooling conditions, for example oil mist,water,oil,air cooling.can be used for dry machining.

  • Brand: WKS TOOL
  • ASIN: B01C5BIYL8
  • UPC: 190203779664
 - JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4
JERRAY Chamfering Mill, Carbide with TiAlN Coated, 4 Flutes, 60 Degree V-Groove Chamfer End, 1/4" Diameter

Type: Chamfering router bits Brand Name: JERRAY Tools Material :HRC50 Carbide with coated Shank Diameter:1/4"(6.35mm) 4Flutes

  • Brand: JERRAY
  • ASIN: B015SQCVZM
 - KEHAOU CNC Tools HRC55 Tungsten Steel with TiAlN Coated Solid Carbide roughing End Mills, 4 Flutes,6mm Diameter, 6mm Shank, 3/4
KEHAOU CNC Tools HRC55 Tungsten Steel with TiAlN Coated Solid Carbide roughing End Mills, 4 Flutes,6mm Diameter, 6mm Shank, 3/4" Length of Cut, 2" Overall Length

Ф6.0x15Cx6Dx50L Material: Tungsten steel;Coating: TiAlN;Suitable speed: 1500-3000/s;Tool diameter tolerance: 0~-0.02mmh;Suitable for machine: CNC machining center, engraving machine, high speed machine, etc.Applicable materials: HRC55 internal carbon steel, alloy steel, tool steel, stainless steel, cast iron, etc

  • Brand: KEHAOU
  • ASIN: B07L85WDDY
  • UPC: 889971340267
 - SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4
SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4" shank diameter, 3" Long, Spiral Router Bit with Coated

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length; Flat Top with 4-Flute, Material: HRC55 Carbide with TiAlN Coated; For CNC,Engraving Machine. Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc; The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet; End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.

  • Brand: SpeTool
  • ASIN: B07Q4J4HVB
 - Cobra Carbide 27304 Micro Grain Solid Carbide Regular Length Hi-Performance End Mill, TiAlN Coated, 3 Flute, 60 Degrees Helix, Square End, 1/2
Cobra Carbide 27304 Micro Grain Solid Carbide Regular Length Hi-Performance End Mill, TiAlN Coated, 3 Flute, 60 Degrees Helix, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter, 1-1/2" Length (Pack of 1)

Cobra Carbide hi-performance end mill suitable for profiling operation. It features high shear geometry with edge strength; increased cutting edge engagement; increased tool life. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining"). Round shanks allow use with a wide variety of toolholding systems. Work material: hardened steel, nickel/inconel alloy and titanium; good for aluminum alloy, alloy steel, stainless steel, cast iron; excellent for carbon steel.

  • Brand: Cobra Carbide
  • ASIN: B00ECKBX46

Coated Solid Carbide End Mill D316 Search Results

Looking for more Coated Solid Carbide End Mill similar ideas? Try to explore these popular searches: Carousel Pin, Pontiac Grand Prix Heater, and Lee Adaptor Ring.

Look at Coated Solid Carbide End Mill Video Reviews

QTR 08 BangGood 8mm Carbide End Mill

Coated Solid Carbide End Mill Review

This is a quick tool review of the 8mm aluminum cutting endmill sent to me for evaluation from Ba...

Tags: banggood.com,tool review,evaluation,milling cut...

Review Of Carbide End Mills From Banggood

Coated Solid Carbide End Mill Review

Review of carbide end mills from Banggood. All material that is being machined in this video will...

Tags: carbide end mill,end mill,machining,tompas11,re...

Solid Carbide Square End Mill with TISiN coating

Coated Solid Carbide End Mill Review

Tags: end mill,Carbide end mill,CNC Cutting Tools,Nar...

Solid Carbide Coating End Mill

Coated Solid Carbide End Mill Review

Any needs, please let me know. WeChat: qy13040890159 Email: [email protected] Skype: +8613...

Tags: end mill,Carbide

Chinese End Mills

Coated Solid Carbide End Mill Review

Pretty impressive dirty cheap Chinese industrial carbide. I do tool reviews,mechanical and e...

Tags: review,testing,carbide,tools,shop hangout,end m...

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com