Compare Prices

Co2 Gas Cylinders


 - 80 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder Tank CGA 580 - FULL
80 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder Tank CGA 580 - FULL

All HP cylinders come with a 10 year hydrotest date stamped. All HP cylinders are within 2 years of stamped date. Meets DOT and/or ISO regulations. DOT number is stamped on the tank. Rated Safety on Valve: 3,360 psi. These are filled at industry standard of 2,015 psi. Prior to shipping, we test each cylinder for 2,015 psi to ensure there are no leaks. Manfacturer's Cylinder Specifications: 80 cu/ft Steel High Pressure Gas Cylinders: Working Pressure = 3AA2015, Test Pressure = 3360, Diameter = 7-1/4", Length = 32-1/2", Weight = 35 lbs. It is advised to contact your local gas supplier(s) to verify their policy on re-filling customer-owned cylinders. No Return on Full or Empty cylinders due to DOT regulations associated with the transport of the cylinders. In cases where damage occurs during transit, Weldfabulous will do our best to correct the issue. Please contact us for any questions or concerns. Shipping only available to Continental US (Lower 48 States). All full cylinders are shipped via UPS Ground or FedEx Ground with Signature Required at the time of delivery. Please provide a physical address for shipping (no PO Boxes).

  • Brand: Various Suppliers
  • ASIN: B00I4Z6QCY
 - Kegco I22-580 22 Cu. ft. Nitrogen Air Tank High Pressure Aluminum Gas Cylinder
Kegco I22-580 22 Cu. ft. Nitrogen Air Tank High Pressure Aluminum Gas Cylinder

This brand new aluminum High Pressure Nitrogen Tank is produced from high strength aluminum alloy 6061-T6, and is popular because it is not as heavy as steel tanks and does not rust. The service pressure is up to 2216 PSI/153 BAR. This cylinder is stamped with required U.S. Department of Transportation and Transport Canada markings. The 580 valves are CGA approved, and have a female thread for nitrogen regulators. PLEASE NOTE: This tank ships empty and will need to be filled before use.

  • Brand: Kegco
  • ASIN: B0037B3BLE
  • UPC: 797734448078
 - HZXVOGEN Flowmeter Argon Co2 Gas Regulator Tig Mig Welding Pressure Reducer Flow Gauge
HZXVOGEN Flowmeter Argon Co2 Gas Regulator Tig Mig Welding Pressure Reducer Flow Gauge

IMPORTANT NOTE: IF YOU ORDER THIS ITEM SHIPPED FROM CHINA, YOU MAY RECEIVE IT IN 4-7 DAYS. All indications showing this exclamation mark are important safety instructions. 1.Flowmeter complies with all current relevant technical regulations and meets all existing standards. 2.The flowmeter may under no circumstances be modified or tampered with without the written consent of the manufacturer. 3.Intermediary connections between the cylinder valve and the cylinder pressure regulator are strictly forbidden. 4.Incorrect use may endanger the operator and the other personnel, damage to the cylinder pressure regulator and the installation may also result. Operating instructions 1.Keep hands and tool clean, oil and grease can cause an explosion on the contact with oxygen. 2.The operator should be fully familiar with these operating instructions prior to the use of this equipment; all instructions should be adhered to when in use. 3.Check that the flowmeter is suitable to the gas to be used. 4.Check that the cylinder value connection is clean and undamaged, if not, you must not connect cylinder pressure regulator. 5.Before connecting the cylinder pressure regulator, the cylinder valve should be swiftly opened and closed to dislodge water or foreign from the valve/regulator inlet seating. ...

  • Brand: HZXVOGEN
  • ASIN: B07LDYYJ28
 - 40 cu/ft 75% Argon 25% CO2 Welding Tank CGA 580 - FULL
40 cu/ft 75% Argon 25% CO2 Welding Tank CGA 580 - FULL

All HP cylinders come with a 10 year hydrotest date stamped. All HP cylinders are within 2 years of stamped date. Meets DOT and/or ISO regulations. DOT number is stamped on the tank. Rated Safety on Valve: 3,360 psi. These are filled at industry standard of 2,015 psi. Prior to shipping, we test each cylinder for 2,015 psi to ensure there are no leaks. Manfacturer's Cylinder Specifications: 40 cu/ft Steel High Pressure Gas Cylinders: Working Pressure = 3AA2015, Test Pressure = 3360, Diameter = 6-3/4", Length = 16-3/8", Weight = 17 lbs. It is advised to contact your local gas supplier(s) to verify their policy on re-filling customer-owned cylinders. No Return on Full or Empty cylinders due to DOT regulations associated with the transport of the cylinders. In cases where damage occurs during transit, Weldfabulous will do our best to correct the issue. Please contact us for any questions or concerns. Shipping only available to Continental US (Lower 48 States). All full cylinders are shipped via UPS Ground or FedEx Ground with Signature Required at the time of delivery. Please provide a physical address for shipping (no PO Boxes).

  • Brand: Various Suppliers
  • ASIN: B00I4Z63UO
 - 5% by Volume Carbon Dioxide Calibration Gas, Balance Nitrogen, 17 Liter Steel Cylinder.
5% by Volume Carbon Dioxide Calibration Gas, Balance Nitrogen, 17 Liter Steel Cylinder.

5% by Volume Carbon Dioxide (CO2) calibration gas with a balance of nitrogen contained in a 17 Liter steel cylinder. Use to calibrate any gas detector requiring the specified gas concentration and mixture. Manufactured under ISO:9002 quality standards by NorLab Specialty Gases with NIST traceability certification.

  • Brand: Norlab by Norco
  • ASIN: B015NUQV8G
 - 80 cf Cylinder for Argon Nitrogen Argon/CO2 Helium w/
80 cf Cylinder for Argon Nitrogen Argon/CO2 Helium w/

This argon tank is typically used for mig welding gas mixes but can be used for other inert mixtures. This tank ships empty but can refilled or exchanged at most gas suppliers. Please check with your local welding supply to be sure they will fill D.O.T. approved UN/ISO cylinders. The D.O.T. has approved these cylinders for use in the USA but it is up to the individual supplier as to whether they will fill them.

  • Color: varies
  • Brand: BTIC
  • ASIN: B076T2M5FC
  • UPC: 612520513788
 - BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

100% Brand New. Color: GoldMaterial: Copper Size: 12cm(L)*7.5cm(W)*16CM(H) Compare the detail sizes with yours, please allow 1-2MM differs due to manual measurement Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. The output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our auction for those. A very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut. Package Content: 1 x Argon CO2 Flow meter

  • Brand: BETOOLL
  • ASIN: B01I67VKFW
  • UPC: 745780992786
 - Sherwood CGA320 CO2 Gas Cylinder Valve - 1.125
Sherwood CGA320 CO2 Gas Cylinder Valve - 1.125" -12 UNF, 3000 PSI

New Sherwood CO2 valve with CGA320 outlet and 1.125" -12 UNF inlet. Sherwood is the undisputed leader in compressed gas valves. The extensive list of quality features and testing in each valve includes: Heavy-duty forged brass body Precisely machined internal components Unitized plug Pressure Relief Device (PRD) Metal-to-metal seal below bonnet threads Direct-drive stem design with optimized O-ring seal 100% helium leak tested Automated assembly and testing ensures exceptional quality. Valve must be installed by a qualified cylinder technician

  • Brand: Sherwood Valves
  • ASIN: B01KIDNABE
  • UPC: 713331086062
 - 2000 PPM Carbon Dioxide Calibration Gas, Balance Nitrogen, 17 Liter Steel Cylinder.
2000 PPM Carbon Dioxide Calibration Gas, Balance Nitrogen, 17 Liter Steel Cylinder.

2000 PPM Carbon Dioxide (CO2) calibration gas with a balance of nitrogen contained in a 17 Liter steel cylinder. Use to calibrate any gas detector requiring the specified gas concentration and mixture. Manufactured under ISO:9002 quality standards by NorLab Specialty Gases with NIST traceability certification.

  • Brand: Norlab by Norco
  • ASIN: B015NUQTMY
 - ZUINIUBI CO2 Gas Cylinder Refill Hose Filling Valve Adapter with G5/8 Connector for Soda Maker Tank 24inch
ZUINIUBI CO2 Gas Cylinder Refill Hose Filling Valve Adapter with G5/8 Connector for Soda Maker Tank 24inch

Description: 24 Inch CO2 Gas Cylinder Refill Hose Filling Valve Adapter with G5/8 ConnectorSpecification: Interface Material: CopperHose Length: 61 cm/24 InchThread For Large CO2 Tank: G5/8Features:Durable in use.Easy to install and use.Can be used with big CO2 tanks with G5/8 connector.You can use this hose filling CO2 to Soda tank.Refill your own soda tank from larger CO2 Tank.Two Valves style, tank fitting and Paintball tank on/off valve.Double valve/ single valve prevent fumbling around or over filling.Package Included:1 x 24" Hose1 x Bag Of Fittings

  • Brand: ZUINIUBI
  • ASIN: B07HTH7LPC
 - 5lb co2 Tank- New Aluminum Cylinder with CGA320 Valve
5lb co2 Tank- New Aluminum Cylinder with CGA320 Valve

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. Aluminum Carbon Dioxide Cylinder with CGA 320 valve installed. Brushed aluminum body with plain dome (colors available), 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed, high strength aluminum alloy 6061-T6, 5.25 inch diameter, 14.2 inch length, 1.125" UNF inlet thread. All cylinders are manufactured in accordance with the U.S. Department of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.

  • Color: Original Version
  • Brand: Luxfer
  • ASIN: B00HQQ3WWE
  • UPC: 858255004164
 - Leak Stopper - Permanent O-Ring for CO2 Gas Cylinders
Leak Stopper - Permanent O-Ring for CO2 Gas Cylinders

The leak stopper is the solution to leaky metal-on-metal or fiber washer connections between your CO2 cylinder and regulator. Brass with O-ring insert, it threads directly into the cylinder with no modification and provides a tight, leak-proof seal.

  • Color: Brass
  • Brand: Home Brew Stuff
  • ASIN: B018UNZLHU
  • UPC: 713331085751
 - Sherwood CGA320 CO2 Gas Cylinder Valve - 3/4
Sherwood CGA320 CO2 Gas Cylinder Valve - 3/4" NGT, 3000 PSI

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. New Sherwood CO2 valve with CGA320 outlet and 3/4\" NGT inlet. Sherwood is the undisputed leader in compressed gas valves. The extensive list of quality features and testing in each valve includes: Heavy-duty forged brass body Precisely machined internal components Unitized plug Pressure Relief Device (PRD) Metal-to-metal seal below bonnet threads Direct-drive stem design with optimized O-ring seal 100 percent helium leak tested Automated assembly and testing ensures exceptional quality. Valve must be installed by a qualified cylinder technician

  • Brand: Sherwood Valves
  • ASIN: B01GW30DG4
  • UPC: 713331085942
 - Cyl-Tec 20 lb CO2 Tank - Aluminum Cylinder with CGA320 Valve and Carry Handle
Cyl-Tec 20 lb CO2 Tank - Aluminum Cylinder with CGA320 Valve and Carry Handle

The Cyl-Tec 20lb CO2 tank is a high quality product that is perfect for many different CO2 applications.

  • Color: Aluminum
  • Brand: Cyl-Tec
  • ASIN: B00ICOKQMI
  • UPC: 701748668957
 - Thoroughbred Empty Argon/CO2 Welding Gas Cylinder - #3, Model# MIX3-B
Thoroughbred Empty Argon/CO2 Welding Gas Cylinder - #3, Model# MIX3-B

Never pay lease or rent charges again! Brand new industrial-grade welding gas cylinder has never been filled. Refillable and exchangeable. Used for MIG welding applications where a 75% argon/25% CO2 shielding gas is required. Works well with Hobart Handler MIG welders. Capacity (cu. ft.): 80, Compatible With: Argon and shielding gas, Product Type: Cylinders, Dimensions L x W x H (in.): 7 x 7 x 32, Valve Type: CGA 580 female, Diameter (in.): 7, DOT Approved: Yes

  • Brand: Thoroughbred
  • ASIN: B000N4ZTN6
  • UPC: 853967040332
 - UP100 Adapters from Female Thread TR21x4 to Male Thread W21.8 for Soda Stream CO2 Cylinders Gas Regulators Homebrew
UP100 Adapters from Female Thread TR21x4 to Male Thread W21.8 for Soda Stream CO2 Cylinders Gas Regulators Homebrew

  • Color: Silver
  • Brand: UP100
  • ASIN: B07D5SJBJ4
  • UPC: 729270227312
 - 24 Inch CO2 Gas Cylinder High Pressure Refill Hose Filling Valve Adapter with Gauge For Soda Stream Tank
24 Inch CO2 Gas Cylinder High Pressure Refill Hose Filling Valve Adapter with Gauge For Soda Stream Tank

Material: hose + metalColor: BlackLength: 24 inchApplication: CGA320 CO2 TankPackage Included:1 x 24 inch soda water adapter hose inflation valve

  • Color: black, brass
  • Brand: Farwind
  • ASIN: B07R6GQXWP
  • UPC: 610825022448
 - 150 cf Cylinder for Argon Nitrogen Argon/CO2 Helium w/
150 cf Cylinder for Argon Nitrogen Argon/CO2 Helium w/

This cylinder is typically used for nitrogen, helium, argon, and argon / carbon dioxide mixes. This cylinder ships empty but can refilled or exchanged at most gas suppliers. This cylinder ships empty but can refilled or exchanged at most gas suppliers. Please check with your local welding supply to be sure they will fill these D.O.T. approved UN/ISO cylinders. The D.O.T. has approved these cylinders for use in the USA but it is up to the individual supplier as to whether they will fill them.

  • Color: varies
  • Brand: BTIC
  • ASIN: B07FF58ZXD
  • UPC: 612520513740

Co2 Gas Cylinders Z798 Search Results

Looking for more Co2 Gas Cylinders similar ideas? Try to explore these popular searches: Mens Plaid Golf Shorts, Www Model Toys Com, and Extended Pin Box.

Look at Co2 Gas Cylinders Video Reviews

How To Transfer CO2 From A 50lb Tank To A Small Cylinder

Co2 Gas Cylinders Review

Gulfstream Tropical Aquarium's video demonstrating how to transfer Co2 from a 50lb tank to a smal...

Tags: Gulfstream,Tropical,Aquarium,Hydro,Stat,Inc,CO2...

Onboard CO2 System Review & Test - Power Tank

Co2 Gas Cylinders Review

Is onboard CO2 the right solution for your off-road vehicle? In this video I give you a detailed...

Tags: power tank co2 system,onboard co2,power tank je...

Co2 or Compressed Air, Which Ones Better?

Co2 Gas Cylinders Review

Let's face it picking Co2 or Compressed Air (HPA) can be a bit confusing, let clear some things u...

Tags: compressed air tank paintball,best paintball ta...

how to buy used welding gas bottles oxygen acetylene argon tank Austin Texas

Co2 Gas Cylinders Review

What to look out for when buying oxygen acetylene argon and other welding gas cylinders, bottles ...

Tags: oxygen,acetylene,welding,tig,welder,mig,weld,ta...

Welding gas bottles buy or lease? ( My thoughts)

Co2 Gas Cylinders Review

Description

Tags:

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com