Bobrick Screws

ClassicSeries extra heavy duty shower curtain rod. Made of 18 gauge (1.2mm) stainless steel tubing with satin finish. Flanges are 2-1/2" (65mm) square. Flanges - one piece, seamless construction. Measures 1-1/4" diameter by 60" length.

• Brand: Bobrick
• ASIN: B00996M644

Grab bar shall be type 304 stainless steel with satin-finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/2" (38mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed mounting flanges shall be 1/8" (3mm) thick stainless steel plate, 2" by 3-1/8" (50 by 80mm), and equipped with two screw holes for attachment to wall. Flange covers shall be 22 gauge (0.8mm), 3-1/4" (85mm) diameter by 1/2" (13mm) deep, and shall snap over mounting flange to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall comply with barrier-free accessibility guidelines (including ADAAG in the USA) for structural strength. Measures 1-1/2" diameter by 36" length.

• Color: Satin
• Brand: Bobrick
• ASIN: B00996OEV2
• UPC: 884427366259

Surface mounted seat cover dispenser. 8-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. All-welded construction with beveled opening. Dispenses single or half-fold paper toilet seat covers from beveled opening. Dispenser fills from bottom through concealed opening. Capacity: 250 toilet seat covers. Allow 5" (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit. Measures 15-3/4" width by 11" height by 2" depth.

• Color: Satin
• Brand: Bobrick
• ASIN: B004MDLZ5A
• UPC: 641438068509

Type 304 stainless steel, satin finish. Anti slip mop holders have spring loaded rubber cam that grips handles 7/8" to 1-1/4" (20–30mm) diameter. Holds 4 mops 3-1/4" (85mm) from wall. 1 Year limited warranty. Measures 36" length by 5" height.

• Color: Stainless Steel
• Brand: Bobrick
• ASIN: B00996GVD6
• UPC: 716954000507

Satin-finish stainless steel. Seamless beveled flange. Dispenses 350 C-fold or 475 multifold towels. Knob-latch retains door. Removable waste container has 2-gallon. (7.6-L) capacity. Equipped with a knob latch. Top edges are hemmed for safe handling. Friction catch. Rough wall opening: 12-5/8" width, 26-5/8" height, 4" minimum depth (320 by 675 by 100mm). Materials: Cabinet - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Flange - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction. Door - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge. Measures 14" width by 28" height.

• Color: Stainless Steel
• Brand: Bobrick
• ASIN: B00996IAZS
• UPC: 753760766616

Description : Bobrick 1002239 Door Screw Pkt, Is/Os, 1540 Repair Part for Washroom ProductsWARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

• ASIN: B07L6858DX

Bobrick 270 ConturaSeries® Surface-Mounted Sanitary Napkin Disposal

• Color: Satin
• Brand: Bobrick
• ASIN: B004MDLZ6E
• UPC: 716954000903

Straight grab bar. 36" (915mm) long, 1-1/4" (32mm) diameter tubing. Constructed of 18 gauge (1.2mm), type 304 satin finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304 stainless steel plate, 2" width by 3-1/8" height (50 x 80mm), with screw holes for concealed anchors. Cover is 22 gauge (0.8mm), type 304 stainless steel with satin finish, 3-1/4" (85mm) diameter. Cover snaps over mounting flange to conceal screws.

• Color: Satin
• Brand: Bobrick
• ASIN: B00996O12Y
• UPC: 716954002990

Constructed of polypropylene and a unibody steel chassis, this baby changing station supports 200 lbs with minimal deflection. The steel-on-steel hinge has greater resistance to wear and improved durability and the gas spring mechanism ensures smooth open and close of the unit. Its sleek design and color palette matches modern restroom design and décor. The dual liner cavity with lock minimizes operator refills and discourages potential vandalism. The product includes child protection straps and bag hooks. Bed surface exclusively contains Microban antimicrobial, reducing odor causing bacteria. Liner dispenser features two liner cavities. Each cavity holds 25 liners, for a combined total of 50 liners per unit. Contributes to LEED certified building requirements. The KB200’s sleek design and color palette matches modern restroom design and décor.

• Color: Grey
• Brand: Koala Kare
• ASIN: B00OGIB5E2
• UPC: 749628417462

ClassicSeries extra heavy duty shower curtain rod. Made of 18 gauge (1.2mm) stainless steel tubing with satin finish. Flanges are 2-1/2" (65mm) square. Flanges - one piece, seamless construction. Measures 1-1/4" diameter by 36" length.

• Brand: Bobrick
• ASIN: B00996LHHQ

ConturaSeries surface mounted waste receptacle. Made of type 304 stainless steel with satin finish. Bottom edges hemmed for safety. Hooks hold furnished reusable vinyl liner; removable for servicing. Capacity: 6.4 gallon (24.2‑L). Measures 14" width by 18" height by 6" depth.

• Color: Stainless Steel
• Brand: Bobrick
• ASIN: B00996KKUQ
• UPC: 716954010230

Grab bar shall be type 304 stainless steel with satin-finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/2" (38mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed mounting flanges shall be 1/8" (3mm) thick stainless steel plate, 2" by 3-1/8" (50 by 80mm), and equipped with two screw holes for attachment to wall. Flange covers shall be 22 gauge (0.8mm), 3-1/4" (85mm) diameter by 1/2" (13mm) deep, and shall snap over mounting flange to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall comply with barrier-free accessibility guidelines (including ADAAG in the USA) for structural strength. Measures 1-1/2" diameter by 42" length.

• Color: Stainless Steel
• Brand: Bobrick
• ASIN: B00996PAO2
• UPC: 716954003591

Bobrick 1002484 Driver Kit For Torx Screws Repair Part for Washroom ProductsWARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Brand: Bobrick
• ASIN: B00XWEZIEY
• UPC: 716954008190

6806x42 Grab Bar Size: 42" Features: -Bar passes through flange and is heliarc welded to form single structural unit. -Cover snaps over mounting flange to conceal screws. -Grab bars that provide 1.5'' clearance from the wall can support loads in excess of 900 pounds when properly installed. -All joints and supports are contour cut and welded. -Peened nonslip gripping surface available. -Concealed anchors and fasteners available as an optional accessory. Product Type: -Grab bar. Weight Capacity: -900 Pounds. Dimensions: -Concealed anchors: 2'' W x 3.125'' H . -Plate thick: 0.125''. -Satin-finish 18-gauge type 304 Stainless Steel tubing 1.5'' diameter. -Cover is 22-gauge (0.8mm) Stainless Steel with Satin-finish. Grab Bar Size 12" - Overall Width - Side to Side: -12". Grab Bar Size 18" - Overall Width - Side to Side: -18". Grab Bar Size 24" - Overall Width - Side to Side: -24". Grab Bar Size 30" - Overall Width - Side to Side: -30". Grab Bar Size 36" - Overall Height - Top to Bottom: -3.25". Specifications: ADA Compliant: -Yes.

• Color: Satin
• Brand: Bobrick
• ASIN: B001BZKBB6
• UPC: 716954003669

Mirror shall have a one-piece type-430 stainless steel channel frame, 1/2" x 1/2" x 3/8" (13 by 13 x 9.5mm), with 90 degree mitered corners; all exposed surfaces shall have bright polished finish. Select float glass mirror shall be guaranteed for 15 years against silver spoilage. Corners shall be protected by friction-absorbing filler strips and the back shall be protected by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" (5mm) thick polyethylene padding. Galvanized steel back shall have integral horizontal hanging brackets located at top and bottom for mounting on concealed rectangular wall hanger to prevent the mirror from pulling away from the wall. Locking devices secure mirror to concealed wall hanger. Mirror shall be removable from the wall. Measures 24" width by 30" height.

• Color: Silver
• Brand: Bobrick
• ASIN: B00996SFNK
• UPC: 716954000149

Grab bar shall be type 304 stainless steel with satin-finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/2" (38mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed mounting flanges shall be 1/8" (3mm) thick stainless steel plate, 2" by 3-1/8" (50 by 80mm), and equipped with two screw holes for attachment to wall. Flange covers shall be 22 gauge (0.8mm), 3-1/4" (85mm) diameter by 1/2" (13mm) deep, and shall snap over mounting flange to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall comply with barrier-free accessibility guidelines (including ADAAG in the USA) for structural strength. Measures 1-1/2" diameter by 36" length.

• Color: Stainless Steel
• Brand: Bobrick
• ASIN: B00996P7VS
• UPC: 716954003584

Satin-finish stainless steel. Tumbler lock on top of cabinet. Door swings down for loading towels. Dispenses 400 C-fold or 525 multifold towels. Cabinet slots indicate refill time. Materials: Cabinet-18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin-finish. Radius on corners of cabinet match corners and edges of door and other Bobrick ConturaSeries washroom accessories. Back has recessed mounting slots to prevent mounting screw heads from snagging towels. Rounded towel tray has hemmed opening to dispense paper towels without tearing. Cabinet inside equipped with 90 degree return towel guide bracket to prevent paper towels from falling forward out when door is opened for servicing. Unit equipped with TowelMate consisting of a 90 degree return towel guide angle inside cabinet to prevent paper towels from falling forward out when door is opened for servicing and a Nylon Rod across the center of the towel tray to dispense paper towels one at a time. Equipped with a tumbler lock keyed like other Bobrick washroom accessories. Unit shall be capable of dispensing 400 C-fold or 525 multifold paper towels 2-1/2" to 3-13/16" deep. Measures 10-13/16" width by 13-1/4" height by 4-7/8" depth.

• Color: Satin
• Brand: Bobrick
• ASIN: B001A0AN1A
• UPC: 716954002358

Double-roll toilet tissue dispenser shall have a heavy-duty cast-aluminum bracket with satin finish. Theft-resistant spindles shall be molded high-impact ABS with retractable pins and concealed locking mechanisms. Unit shall accommodate two standard- core toilet tissue rolls up to 6" (152mm) diameter (2000 sheets). Unit 12-1/2" wide, projection. 4-7/8" from wall. No controlled delivery.

• Color: Satin Aluminum
• Brand: Bobrick
• ASIN: B004MDLZ6Y
• UPC: 640206797696