Compare Prices

Airbrush Stand


 - Darice Holder, 3.25 x 8 Inches Airbrush Stand
Darice Holder, 3.25 x 8 Inches Airbrush Stand

With this Darice Airbrush Holder, you can keep your airbrush tools easily accessible while working! This stand clasps onto the edges of tables with a twisting clamp mechanism.

  • Brand: Darice
  • ASIN: B004GXBXY4
  • UPC: 652695354458
 - 4 SET Airbrush Spray Gun Wash Cleaning Tools Needle Nozzle Brush Glass Cleaning Pot Holder
4 SET Airbrush Spray Gun Wash Cleaning Tools Needle Nozzle Brush Glass Cleaning Pot Holder

4 SET Airbrush Spray Gun Wash Cleaning Tools Needle Nozzle Brush Glass Cleaning Pot Holder Package including: 1* golden color Nozzle Wash Repair tool 1* 5 pc stainless steel needle tool set 1* 5 pc Nylon brush set 1* Airbrush Cleaning Pot Filter Glass Jar Features 1. New and high quality 2. This nozzle needle is ideal for clearing away the blockages with dried paint 3. It can restore your nozzle back to perfect condition With careful use 4. A must-have accessory for the user of airbrush 5. The cleaning pot used to clean the airbrush, and collect residual paint inks. Introduction: The nozzle needle is one of the most important replacement parts for painting airbrush. If you want to have the perfect spray painting, perhaps these delicate stainless steel needles are the best way to replace your original one. So they are sturdy and durable.The tool is used to clean the paint which block the nozzle, so you can reuse the nozzle again after cleaning it. Including two Different size cleaning brush, each brush size different. Made of durable stainless steel with nylon bristles Brushes come with a key ring and are about 3.5" long Easily clean paint off all the hard to reach areas in an airbrush, spray gun or any other item with small orifices that need cleaning like the fluid tip, air cap,...

  • Brand: Ebest
  • ASIN: B0154HN2NA
  • UPC: 730656531374
 - Iwata-Medea Universal Airbrush Holder
Iwata-Medea Universal Airbrush Holder

Iwata's Universal Airbrush holder holds your airbrush safely in place when not in use. This sturdy airbrush holder clamps to your table and holds airbrush upright and level. Angle of air brush holder turns up to 360-Degree. Clamps work on most surfaces. Measures about 4 1/2-Inch high from table bottom edge to top. Clamps edge as wide as 3 inches.

  • Color: Silver
  • Brand: Iwata-Medea
  • ASIN: B01DYN6GJ8
  • UPC: 734748222041
 - Master Airbrush Brand Table Top Airbrush Holder Station Stand Holds 4 Airbrushes Swivel Tilt Set
Master Airbrush Brand Table Top Airbrush Holder Station Stand Holds 4 Airbrushes Swivel Tilt Set

An excellent choice for the beginner or the professional artist needing compact storage. - Airbrush Holder holds up to 4 airbrushes (air brushes not included) - Suction Cups on Base allow this holder to be set on tables, bench tops or any surface where the 4 rubber suction pads will stick - Has a 360 degree turning angle for airbrushes plus individual swivels for the lower two holders - This holder makes it very convenient to keep your airbrush / airbrushes organized! - Has a 360 degree turning angle for airbrushes - Works with almost any brand of airbrush - A must-have for every airbrush artist - beginner or professional. - Use this holder with any of the dozens of airbrushes, airbrush kits or airbrush and compressor kits that we sell

  • Brand: Master Airbrush
  • ASIN: B001N869ZI
  • UPC: 844825080133
 - Master Airbrush® Brand Universal Clamp-on Airbrush Holder. Holds up to 4 Airbrushes and All Brands, Master, Iwata, Paasche, Badger, Grex and Generics
Master Airbrush® Brand Universal Clamp-on Airbrush Holder. Holds up to 4 Airbrushes and All Brands, Master, Iwata, Paasche, Badger, Grex and Generics

Part# ABD HD-150 Universal Clamp-On Airbrush Holder that holds up to 4 airbrushes An excellent choice for the beginner or the professional artist needing compact storage. * Airbrush Holder holds up to 4 airbrushes (air brushes not included) * Attaches easily to the table or bench top with the built-in clamp screw * Has a 360 degree turning angle for airbrushes plus individual swivels for the lower two holders * This holder makes it very convenient to keep your airbrush / airbrushes organized! * Holder includes a removable bracket to hold a airbrush regulator * A must-have for every airbrush artist - beginner or professional * Use this holder with any of the dozens of airbrushes, airbrush kits or airbrush and compressor kits that we sell

  • Brand: Master Airbrush
  • ASIN: B001BR6CO4
  • UPC: 844825080140
 - PointZero Clamp-on Stand Table-Mount Two Airbrush Holder Station
PointZero Clamp-on Stand Table-Mount Two Airbrush Holder Station

The Hold-22C from PointZero Airbrush is a clamp-type, edge-mount stand for holding one or two airbrushes. Easily and securely mounts on a table, bench or any surface up to 2" thick; simply place in desired location and tighten clamp screw at the bottom of the unit. The underside of the base is covered in high-density foam to protect your table or work surface. The coated airbrush cradles are fully adjustable and can be tightened in place (they swivel, tilt and have 1" of vertical adjustment to provide clearance for siphon-feed airbrush jars ). As an added bonus, access to the following exclusive airbrushing guide downloads is included: Top 8 Cake Airbrushing Tips, Guide to Airbrush Cake Decorating, Developing Basic Artistic Skills, 10 Essential Airbrushing Tips, Airbrushing Strokes and Techniques, Airbrush Cleaning Manual, and the Airbrush Lettering Guide.

  • Brand: PointZero Airbrush
  • ASIN: B004KNHGMI
  • UPC: 609728824600
 - T-Sign 66
T-Sign 66" Reinforced Artist Easel Stand, Extra Thick Aluminum Metal Tripod Display Easel 21" to 66" Adjustable Height with Portable Bag for Floor/Table-Top Drawing and Displaying

T-Sign Reinforced Aluminum Extra Sturdy 66 Inches Tall Adjustable Height Easel StandThis T-Sign 66" Tall Lightweight Aluminum Field Easel is made of high-quality lightweight aluminum alloy, which is really tough and sturdy. The height can be adjusted from 21" to 66", which is best display easel for dry erase marker board, whiteboard, chalkboard, posters, paintings. Will hold a large pad of paper, Artists can use it in the studio, as a tabletop painting easel, outdoor in the field, or to display art, canvas paintings, pictionary, etc.Specifications:-Material: Aluminum Alloy -Product Weight: 3.1 lbs -Package Dimensions: 25.5 x 4.4 x 3.7 inchesAssembly: Please Refer to the Installation Instructions in the Fifth Product Image of the Commodity PagePackage Includes: -1 x Easel -1 x black Fixing Bar -1 x black Nylon BagCustomer Service:Please read the product instructions carefully, in the event of difficulties, do not hesitate to contact our Customer Service Department: [email protected] Goal is to Serve You until Get Your Satisfaction About T-SignT-Sign is a professional manufacturer of high-quality sign stand, We have twenty years of experience in this industry, produced hundreds of thousands of stand products every month, from poster stands, banner stands, magazine stands...

  • Color: Black 1-pack
  • Brand: T-SIGN
  • ASIN: B076X3WZHB
  • UPC: 738447280050
 - Evemodel GJJC19B Painting Stand Base 14 x 19 Holes 20pcs Alligator Clip Stick Set Modeling Tools Airbrush Hobby Model Parts
Evemodel GJJC19B Painting Stand Base 14 x 19 Holes 20pcs Alligator Clip Stick Set Modeling Tools Airbrush Hobby Model Parts

Features:100% Brand new and high quality.Perfect for Railway & Building Layout!Specifications:Brand:evemodel.Material: Plastic & Metal.Color: Black.Base Size: About 20 x 15cm (L x W).Alligator Clip Length: About 19cm .Package Included:1 x Painting Stand Base.20 x Alligator Clip.40 x cover.

  • Brand: Evemodel
  • ASIN: B07GWFCRHZ
  • UPC: 722943784273
 - OPHIR Airbrush Holder Station Manifold Table Stand with 4 Splitters That Can Hold Up to 4 Airbrushes (Without air Hose)
OPHIR Airbrush Holder Station Manifold Table Stand with 4 Splitters That Can Hold Up to 4 Airbrushes (Without air Hose)

Description: This 4-Airbrush holders set is excelusively designed by OPHIR. You can connect one air hose to the air compressor and it is very convenient for you to use four different colors of airbrushes simutaneously. Specification: Size of Connectors: 1/8 Length of Air Hose: 1.8M Package Included: 1x 4-Airbrush Holders Set

  • Color: Black
  • Brand: OPHIR
  • ASIN: B06Y4TT4JP
  • UPC: 742010383055
 - Master Airbrush Brand Lighted Portable Hobby Airbrush Spray Booth with LED Lighting for Painting All Art, Cake, Craft, Hobby, Nails, T-Shirts & More. Includes 6 Foot Exhaust Extension Hose
Master Airbrush Brand Lighted Portable Hobby Airbrush Spray Booth with LED Lighting for Painting All Art, Cake, Craft, Hobby, Nails, T-Shirts & More. Includes 6 Foot Exhaust Extension Hose

Part# MAS B440DCLK Portable Hobby Airbrush Spray Booth Kit with Exhaust Extension Hose that Extends up to 5.6 Feet A Great Booth that's Easy to Set-Up & Use! The High Volume Fan Extracts Overspray & Reduces the Fumes from Airbrush & Spray Gun Materials. It's Ideal to use when Spraying Models, Small Parts, Ceramics, Etc Features: Powerful: 25 Watts with a 4 Cubic Meters/Minute Fan Extraction Rate LED Lighting: Light your work surface with the removable LED Lighting kit Portable & Compact: Easily Folds into a Suitcase Shape w/Handle for Carrying or Storing Lightweight: Only 8.5 Lbs Exhaust Extension Hose: Flexible Hose that Extends up to 5.6 Feet Booth Filter: 7/8" Thick 2 Layer High Density Fiberglass Booth Filter (Replacement Filters Available) 7-1/2" Diameter Revolving Turntable Full 1-Year Warranty: Not intended for use with Hazardous Materials, Flammable or Explosive Paints or Materials Voltage: Operates at 12V DC Using a Direct Plug in 110V AC Adapter Low Noise: Only 47 db Electric Cord: 6 Ft Dimensions when Set-Up: 16.5" Wide x 19" Deep x 13.5" High Dimensions when Folded-Up: 16.5" Wide x 6" Deep x 8" High If you Buy Two Spray Booths, they can be combined into One Double Sized Spray Booth!

  • Color: Gray
  • Brand: Master Airbrush
  • ASIN: B00NLQ019A
  • UPC: 848849072785
 - Harder and Steenbeck EVO Design Airbrush Holder by SprayGunner
Harder and Steenbeck EVO Design Airbrush Holder by SprayGunner

The new airbrush holder for all Harder & Steenbeck and Hansa airbrushes is slim, elegant and incredibly stable. The stand has three supporting legs, ensuring that suction, flow and side fitting systems are held firmly in place. Its pyramid-like shape makes it particularly space-saving on desktops.

  • Brand: Harder & Steenbeck
  • ASIN: B019WT4ECY
  • UPC: 793066405956
 - Tamiya America, Inc Model Stand, TAM74522
Tamiya America, Inc Model Stand, TAM74522

The Spray-Work Painting Stand Set makes airbrushing and spray painting so easy!A multipurpose painting stand set with 2 easy to use stands. Both stands can be adjusted and used for a wide range of sized and shaped pieces. The 16cm diameter turntable has different sized holes to affix various parts to the stand. Parts can be painted easily while still on the sprue or can be affixed to something like a pencil or chopstickinserted into the larger holes. Comes with 4 spring clips. Fixing a model body to the stand from the inside, the body stand is perfect for spray painting1/24 scale cars. The width of clips can also be adjusted to obtain the most stable hold. Basic Specifications Comes with 4 spring clips.

  • Brand: Tamiya
  • ASIN: B00080DIWE
 - PointZero Four Station Airbrush Tabletop Stand Holder
PointZero Four Station Airbrush Tabletop Stand Holder

Tabletop airbrush stand, model Hold-44T from PointZero Airbrush. Heavy-duty steel base. Attaches to any smooth surface with the included suction-cup feet, or remove the feet to permanently secure the stand to your work surface (screws / bolts not included). Holds up to four airbrushes total; two in the swiveling holders at the base of the stand, and two in the tilting, coated cradles at the top. The entire holder assembly also swivels on the base, and can be tightened in place with the tension knob. As an added bonus, access to the following exclusive airbrushing guide downloads is included: Top 8 Cake Airbrushing Tips, Guide to Airbrush Cake Decorating, Developing Basic Artistic Skills, 10 Essential Airbrushing Tips, Airbrushing Strokes and Techniques, Airbrush Cleaning Manual, and the Airbrush Lettering Guide.

  • Color: Black
  • Brand: PointZero Airbrush
  • ASIN: B004KNBVXI
  • UPC: 609728824624
 - Master Airbrush Brand Universal Clamp-On Airbrush Holder that Holds Up to 6 Airbrushes
Master Airbrush Brand Universal Clamp-On Airbrush Holder that Holds Up to 6 Airbrushes

HD-166 Airbrush Holder holds up to 6 airbrushes and attaches easily to the table or bench top with the built-in clamp screw. A must-have for every airbrush artist - beginner or professional. Easy clamp mount makes it easy - holds up to 6 airbrushes.

  • Brand: Master Airbrush
  • ASIN: B00AVAE2N0
  • UPC: 844998104131
 - Master Airbrush Smooth Rotating 7.5 in. Diameter Turntable - For Hobby Spray Booths, Airbrushing Projects, Cake Decorating, Rotating TV or Monitor and More
Master Airbrush Smooth Rotating 7.5 in. Diameter Turntable - For Hobby Spray Booths, Airbrushing Projects, Cake Decorating, Rotating TV or Monitor and More

Part# MAS P130 Smooth Rotating 7-1/2" Diameter Revolving Turntable - Ideal For Hobby Spray Booths, Cake Decorating and More! Smooth Rotating Turntable from the Hidden Interior Ball Bearing Track. Rubber Feet to Hold Table in Place while Using It. Ideal for Multiple Uses such as: Hobby Spray Booths: Stand for Holding Parts and Items to be Painted Models, Small Parts, Ceramics, Radio Control Models, Figurines, Etc... Allows you to Rotate and Reach all the Areas to be Painted Cake Decorating: Ideal for Positioning Cakes for Decorating Beautiful Borders, Icing the Sides Perfectly Smooth, Combing and Leveling The Visible Platform Holds Cakes up to 7.5", but can Hold Larger Cakes if Needed Ideal as a Swiveling Cake Stand when Serving Slices of Cake Lazy Susan: Rotating Tray for Food Items or a Swivel Display Base for Toys, Models, Etc...

  • Brand: Master Airbrush
  • ASIN: B00ATDSA00
  • UPC: 844998104056
 - MAGIKON Airbrush Cleaning Pot , Clean Paint Jar , also can be used as Air Brush Holder
MAGIKON Airbrush Cleaning Pot , Clean Paint Jar , also can be used as Air Brush Holder

3-in-1 Airbrush Cleaning Pot - Easy-to-use: 1.insert one of the included filter pads in the filter tube. 2.Fill the jar 1/4 full with water and close the cover. 3.Add solvent to your airbrush's color cup and spray through the rubber port in the cover, flushing the pigment from the brush and into the pot.

  • Color: black and white
  • Brand: MAGIKON
  • ASIN: B00MII5RSM
  • UPC: 069942312183
 - Iwata-Medea Universal Spray Out Pot
Iwata-Medea Universal Spray Out Pot

Iwata Table Top Cleaning Station with no overspray while cleaning your airbrush the Table-Top Cleaning Station with an easy-to-clean container proves to be an easy and portable solution for your painting needs. Comes with an easy-to-change filter.*Airbrush not included.

  • Color: Black
  • Brand: Iwata-Medea
  • ASIN: B01DYN6ESG
  • UPC: 734748202128
 - PointZero Clamp-on Stand Table-Mount Four Airbrush Holder Station
PointZero Clamp-on Stand Table-Mount Four Airbrush Holder Station

Clamp-type, edge-mount airbrush stand, model Hold-44C from PointZero Airbrush. Easily and securely mounts on a table, bench or any surface up to 2" thick; simply place in desired location and tighten clamp screw at the bottom of the unit. The underside of the base is covered in high-density foam to protect your table or work surface. Holds up to four airbrushes total; two in the swiveling holders at the base of the stand, and two in the tilting, coated cradles at the top. This stand also features a removable bracket to hold a standard airbrush regulator. As an added bonus, access to the following exclusive airbrushing guide downloads is included: Top 8 Cake Airbrushing Tips, Guide to Airbrush Cake Decorating, Developing Basic Artistic Skills, 10 Essential Airbrushing Tips, Airbrushing Strokes and Techniques, Airbrush Cleaning Manual, and the Airbrush Lettering Guide.

  • Brand: PointZero Airbrush
  • ASIN: B004KNFOTA
  • UPC: 609728824617

Airbrush Stand E597 Search Results

Looking for more Airbrush Stand similar ideas? Try to explore these popular searches: Nature Made Lutein, Race Scoops, and Gto Judge.

Look at Airbrush Stand Video Reviews

Iwata workstation airbrush holder review

Airbrush Stand Review

Yet another great addition to the iwata workstation series THE UNIVERSAL AIRBRUSH HOLDER

Tags:

Review: Portable Airbrush Spray Booth

Airbrush Stand Review

UPDATE: As of 8/26/12 these are still selling on Amazon for $42 + shipping: http://www.amazon.com...

Tags: miniature,painting,games,workshop,warhammer,40k...

Review: Hobbiworkz Airbrush Cleaning Pot

Airbrush Stand Review

Unboxing and review of Hobbiworkz' cleaning pot. Full review here: http://otakuonabudget.blogspot...

Tags: Airbrush,cleaning

Central Pneumatic Airbrush Holder Harbor Freight

Airbrush Stand Review

Dandy little airbrush holder from Harbor Freight made by Central Pneumatic! Solid and heavy, idea...

Tags: Central Pneumatic,Airbrush,Holder,Airbrush Hold...

Tamiya Spray-Work Painting Stand Set Scale Model Tool Review

Airbrush Stand Review

A review of the Tamiya Spray Stand. A bit of a luxury, but one I've been promising myself for ag...

Tags: Scale model review,modelling review,modelling h...

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com