Compare Prices

3m Cold Shrink Tubing


 - 3M 8
3M 8" Medium Wall Cold Shrink Tubing, Flexible EPDM Rubber, Shrink Ratio Not Rated

The 3M Cold Shrink Connector Insulator 8420 Series has an open-ended, tube-shaped design and 1 kV rating that let the sleeve act as both a moisture barrier and insulator in primary electrical applications. The strong, EPDM rubber material also helps protect wires from damage due to ozone, acids, and alkalis, and it stands up to extreme temperatures of -40° to 194°F (-40° to 90°C). Item: Cold Shrink Connector Insulators Shrink Tubing Type: Cold Shrink Tubing Shrink Tubing Wall Type: Medium Wall Shrink Tubing Material: EPDM Rubber Shrink Tubing Material Type: Flexible Flame Retardant: No Shrink Tubing Adhesive Lined: No Shrink Tubing Usable Temp. Range: -40 Degrees to 194 Degrees F Shrink Ratio: Not Rated Use Shrink Tubing With Wire Size: 10 to 1/0 AWG Shrink Tubing I.D. Before Shrinking: 0.820" I.D. After Shrinking: 0.100" Shrink Tubing Length: 8" Color: Black Max. Voltage: 1000V Features: Flexible, Requires No Tools or Heat, Moisture-Tight Seal, UV Resistant, Suitable for Direct Buried Applications Standards: ANSI C119.1

  • Brand: CAI - 3M
  • ASIN: B07J5LVZ8L
  • UPC: 696333658652
 - 3M 00054007090564 8428-12 450-800 Kcmil 3m Cold Shrink Tubing
3M 00054007090564 8428-12 450-800 Kcmil 3m Cold Shrink Tubing

8428-12 COLD SHRINK CONNECTOR INSULATOR

  • Brand: 3M
  • ASIN: B002QN1NZ0
  • UPC: 054007090564
 - 3M Cold Shrink Tubing 8427 12
3M Cold Shrink Tubing 8427 12"

3M Cold Shrink Tubing 8427 12"

  • Brand: 3M
  • ASIN: B01G6A1Q32
 - 3m 6-1/2
3m 6-1/2" Medium Wall Cold Shrink Tubing, Flexible EPDM Rubber, Shrink Ratio Not Rated Gray 8443-6.5 - 1 Each

Get the insulation your job needs with the 3M 8440 Series Cold Shrink Silicone Insulator. From overhead and cable tray applications to a range of indoor and outdoor installations, it offers primary electrical insulation wherever you need it. Efficient insulators protect in-line splices up to 1kV with constant radial pressure that seals out moisture without adhesives or glue. 1000V-rated for solid dielectric insulated wire and cable splices, this insulator operates in temperatures of -66 to 500 °F (-55 to 260 °C). Shrink Tubing, 0.56in ID, Gray, 6-1/2in

  • Color: Gray
  • Brand: 3M
  • ASIN: B007ICQQOC
  • UPC: 094714018932
 - 3M 12
3M 12" Medium Wall Cold Shrink Tubing, Flexible EPDM Rubber, Shrink Ratio Not Rated

The 3M Cold Shrink Connector Insulator 8420 Series has an open-ended, tube-shaped design and 1 kV rating that let the sleeve act as both a moisture barrier and insulator in primary electrical applications. The strong, EPDM rubber material also helps protect wires from damage due to ozone, acids, and alkalis, and it stands up to extreme temperatures of -40° to 194°F (-40° to 90°C). Item: Cold Shrink Connector Insulators Shrink Tubing Type: Cold Shrink Tubing Shrink Tubing Wall Type: Medium Wall Shrink Tubing Material: EPDM Rubber Shrink Tubing Material Type: Flexible Flame Retardant: No Shrink Tubing Adhesive Lined: No Shrink Tubing Usable Temp. Range: -40 Degrees to 194 Degrees F Shrink Ratio: Not Rated Use Shrink Tubing With Wire Size: 450 to 800 kcmil Shrink Tubing I.D. Before Shrinking: 1.940" I.D. After Shrinking: 0.950" Shrink Tubing Length: 12" Color: Black Max. Voltage: 1000V Features: Flexible, Requires No Tools or Heat, Moisture-Tight Seal, UV Resistant, Suitable for Direct Buried Applications Standards: ANSI C119.1

  • Color: Black
  • Brand: CAI - 3M
  • ASIN: B00HKJSRZY
  • UPC: 696333888639
 - 3M 6
3M 6" Medium Wall Cold Shrink Tubing, Flexible EPDM Rubber, Shrink Ratio Not Rated - pkg. of 10

Make sure your connections are protected with a 3M 8420 Cold Shrink Connector Insulator. It guards against damage from ozone, acids and alkalis, and it provides primary electrical insulation for applications rated up to 1 kV. Its EPDM rubber construction provides rugged environmental sealing and makes it suitable for operating temperatures ranging from -40 to 194 degrees F (-40 to 90 degrees C). It is also suitable for direct buried applications. Item: Cold Shrink Tubing Shrink Tubing Type: Cold Shrink Tubing Shrink Tubing Wall Type: Medium Wall Shrink Tubing Material: EPDM Rubber Shrink Tubing Material Type: Flexible Flame Retardant: No Shrink Tubing Adhesive Lined: No Shrink Tubing Usable Temp. Range: -40 Degrees to 194 Degrees F Shrink Ratio: Not Rated Use Shrink Tubing With Wire Size: 250 to 400 kcmil Shrink Tubing I.D. Before Shrinking: 1.380" I.D. After Shrinking: 0.670" Shrink Tubing Length: 6" Color: Black Max. Voltage: 1000V Features: Flexible, Requires No Tools or Heat, Moisture-Tight Seal, UV Resistant, Suitable for Direct Buried Applications Standards: ANSI C119.1

  • Brand: CAI - 3M
  • ASIN: B07J5TZZFQ
  • UPC: 696333758321
 - 3M Heat Shrink Tubing, 4' Length x 1/8
3M Heat Shrink Tubing, 4' Length x 1/8" Width, White

3M™ heat shrink shrinks to half of its original size (2:1) and offers an outstanding balance of electrical, physical and chemical properties for a wide variety of applications. Rated for 275°F(135°C) continuous operation.

  • Brand: 3M
  • ASIN: B0002BA4AS
  • UPC: 051135367797
 - 3M Cold Shrink End Cap EC-4, use range of 1.79-3.32 in (45,5-84,3 mm)
3M Cold Shrink End Cap EC-4, use range of 1.79-3.32 in (45,5-84,3 mm)

Use the 3M EC Cold Shrink End Cap seals in moisture to protect cables, pipes and other cylindrical objects. The close-ended, tubular rubber sleeve offers a tight, durable seal that lasts for years. The end cap has been factory-expanded and loaded onto a removable core.

  • Brand: 3M
  • ASIN: B00JR8K0GU
  • UPC: 051128583913
 - 3M 6
3M 6" Thin Wall Heat Shrink Tubing, Flexible Polyolefin, Shrink Ratio 2:1 - pkg. of 10

This flexible polyolefin heat shrink tubing is designed to be split resistant, cold flow resistant, mechanically tough, and easily marked. It is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging, and fire-resistant covering. Item: Heat Shrink Tubing Shrink Tubing Type: Heat Shrink Tubing Shrink Tubing Wall Type: Thin Wall Shrink Tubing Material: Polyolefin Shrink Tubing Material Type: Flexible Flame Retardant: Yes Shrink Tubing Adhesive Lined: No Shrink Tubing Usable Temp. Range: -67 Degrees to 275 Degrees F Shrink Ratio: 2:1 Use Shrink Tubing With Wire Size: 12 to 8 AWG Shrink Tubing I.D. Before Shrinking: 0.375" I.D. After Shrinking: 0.187" Shrink Tubing Wall Thickness After Shrinking: 0.025" Shrink Tubing Length: 6" Color: Black Min. Shrink Temp.: 212 Degrees F Max. Voltage: 600V Features: Flame Retardant, Solvent Resistant Standards: SAE-AMS-DTL-23053/5, AMS-3636,AMS-3637,UL,CSA,ABS,MIL

  • Brand: CAI - 3M
  • ASIN: B07J5TVR1X
  • UPC: 696333735117
 - 3M 1/16 Heat Shrink Tubing 4 ft. (White)
3M 1/16 Heat Shrink Tubing 4 ft. (White)

3M™ heat shrink shrinks to half of its original size (2:1) and offers an outstanding balance of electrical, physical and chemical properties for a wide variety of applications. Rated for 275°F(135°C) continuous operation.

  • Color: White
  • Brand: 3M
  • ASIN: B0002BA40I
  • UPC: 051135367537
 - 3M 3/4
3M 3/4" Heat Shrink Tubing 4 ft. (Blue)

3M™ heat shrink shrinks to half of its original size (2:1) and offers an outstanding balance of electrical, physical and chemical properties for a wide variety of applications. Rated for 275°F(135°C) continuous operation.

  • Brand: 3M
  • ASIN: B0002BFYXA
  • UPC: 051135368169
 - 3M 8447-8 Cold Shrink,1/0 - 3/0AWG,8.0In,Gray
3M 8447-8 Cold Shrink,1/0 - 3/0AWG,8.0In,Gray

When you're insulating solid dielectric insulated wire and cable splices in 1000V applications, the 3M 8440 Series Cold Shrink Silicone Insulator is a great choice. You can install it without using any tools. They also protect in-line splices up to 1kV with constant radial pressure that seals out moisture without adhesives or glue. Indoors or out, it handles overhead or cable tray applications and holds up in operating temperatures ranging from -66 to 500 °F (-55 to 260 °C). Each insulator is supported by a removable core. Shrink Tubing, 0.95in ID, Gray, 8in

  • Color: Gray
  • Brand: 3M
  • ASIN: B005T7NVL4
 - 3M Cold Shrink QS-III Splice Kit 5535A-250-CU, Tape Shielded, Wire Shielded, Longitudinally Corrugated, 35 kV
3M Cold Shrink QS-III Splice Kit 5535A-250-CU, Tape Shielded, Wire Shielded, Longitudinally Corrugated, 35 kV

This splice is a 35 kV-class inline splices for joining tape, longitudinally corrugated (LC), wire and UniShield(R) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with a copper conductor size of 250 kcmil.

  • Brand: 3M
  • ASIN: B0081JTSF0
  • UPC: 054007430810
 - 3M 3/4
3M 3/4" Red Heat Shrink Tubing 4 ft.

3M™ heat shrink shrinks to half of its original size (2:1) and offers an outstanding balance of electrical, physical and chemical properties for a wide variety of applications. Rated for 275°F(135°C) continuous operation.

  • Brand: 3M
  • ASIN: B0002BFYVW
  • UPC: 051135368152
 - 3M 6-1/2
3M 6-1/2" Medium Wall Cold Shrink Tubing, Flexible EPDM Rubber, Shrink Ratio Not Rated

Get the insulation your job needs with the 3M 8440 Series Cold Shrink Silicone Insulator. From overhead and cable tray applications to a range of indoor and outdoor installations, it offers primary electrical insulation wherever you need it. Efficient insulators protect in-line splices up to 1kV with constant radial pressure that seals out moisture without adhesives or glue. 1000V-rated for solid dielectric insulated wire and cable splices, this insulator operates in temperatures of -66 to 500 °F (-55 to 260 °C). Item: Cold Shrink Tubing Shrink Tubing Type: Cold Shrink Tubing Shrink Tubing Wall Type: Medium Wall Shrink Tubing Material: EPDM Rubber Shrink Tubing Material Type: Flexible Flame Retardant: No Shrink Tubing Adhesive Lined: No Shrink Tubing Usable Temp. Range: -66 Degrees to 500 Degrees F Shrink Ratio: Not Rated Use Shrink Tubing With Wire Size: 6 to 2 AWG Shrink Tubing I.D. Before Shrinking: 0.560" I.D. After Shrinking: 0.270" Shrink Tubing Length: 6-1/2" Color: Gray Max. Voltage: 1000V Features: Flexible, Requires No Tools or Heat, Moisture-Tight Seal, UV Resistant, Suitable for Direct Buried Applications Standards: ANSI C119.1

  • Brand: CAI - 3M
  • ASIN: B07J2W7KWW
  • UPC: 696333994217
 - 3M 8423-6 EPDM Rubber Single Conductor Cold Shrink Insulator 6 Inch Relaxed Length 8420 Series™
3M 8423-6 EPDM Rubber Single Conductor Cold Shrink Insulator 6 Inch Relaxed Length 8420 Series™

3M 8423-6 EPDM Rubber Single Conductor Cold Shrink Insulator 6 Inch Relaxed Length 8420 Series™

  • Color: Black
  • Brand: 3M
  • ASIN: B000CG7C2G
 - 3M 50 ft. Thin Wall Heat Shrink Tubing, Flexible Polyolefin, Shrink Ratio 2:1
3M 50 ft. Thin Wall Heat Shrink Tubing, Flexible Polyolefin, Shrink Ratio 2:1

This flexible polyolefin heat shrink tubing is designed to be split resistant, cold flow resistant, mechanically tough, and easily marked. It is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging, and fire-resistant covering. Item: Heat Shrink Tubing Shrink Tubing Type: Heat Shrink Tubing Shrink Tubing Wall Type: Thin Wall Shrink Tubing Material: Polyolefin Shrink Tubing Material Type: Flexible Flame Retardant: Yes Shrink Tubing Adhesive Lined: No Shrink Tubing Usable Temp. Range: -67 Degrees to 275 Degrees F Shrink Ratio: 2:1 Use Shrink Tubing With Wire Size: 4 to 3/0 AWG Shrink Tubing I.D. Before Shrinking: 0.750" I.D. After Shrinking: 0.375" Shrink Tubing Wall Thickness After Shrinking: 0.030" Shrink Tubing Length: 50 ft. Color: Clear Min. Shrink Temp.: 212 Degrees F Max. Voltage: 600V Features: Flame Retardant, Solvent Resistant Standards: SAE-AMS-DTL-23053/5, AMS-3636,AMS-3637,UL,CSA,ABS,MIL

  • Brand: CAI - 3M
  • ASIN: B07J2VXBGP
  • UPC: 696334156317
 - 3M 1/8
3M 1/8" Blue Heat Shrink Tubing 4 ft.

3M™ heat shrink shrinks to half of its original size (2:1) and offers an outstanding balance of electrical, physical and chemical properties for a wide variety of applications. Rated for 275°F(135°C) continuous operation.

  • Brand: 3M
  • ASIN: B0002BA494
  • UPC: 051135367827

3m Cold Shrink Tubing X500 Search Results

Looking for more 3m Cold Shrink Tubing similar ideas? Try to explore these popular searches: Coco Chip, Orange Check Pants, and Skull Crossbones Wings.

Look at 3m Cold Shrink Tubing Video Reviews

Heat Shrink vs. Cold Shrink Tubes - 3M Electrical Cold Shrink Tubes

3m Cold Shrink Tubing Review

Thorne & Derrick provide competitive prices and fast delivery from stock for the complete range o...

Tags: Cold Shrink Tubes,3M Electrical

3M Cold Shrink Tubes

3m Cold Shrink Tubing Review

3M Cold Shrink Tubes - Christopher Dodds, Aged 3, shows how easy it is to use 3M Coldshrink. Co...

Tags: COLD SHRINK,3M COLD SHRINK,COLD SHRINK TUBES,CO...

3M Cold Shrink Tubing - Cable Jointing Solution

3m Cold Shrink Tubing Review

This video shows how to apply 3M Cold Shrink Tubing safely during an underground jointing proces...

Tags: 3M Cold Shrink,3M Tubing,Cold Shrink Tubing,3M ...

3M Cold Shrink vs Heat Shrink

3m Cold Shrink Tubing Review

This video by 3M Electrical shows the benefits of using 3M Cold Shrink over heat shrink cable acc...

Tags: 3m cold shrink,heat shrink,cable joint,cable in...

3M Cold Shrink Cable Joint QS4 - MV-HV JCN Cables

3m Cold Shrink Tubing Review

Thorne & Derrick International, based in the UK, are Main Distributors for 3M Electrical products...

Tags: Cold Shrink Joints

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com