Compare Prices

250k Audio Taper Pot


 - CTS 250K 1/4
CTS 250K 1/4" Bushing Split Shaft Audio Taper Potentiometer - 450G Series

ONE (1X) CTS 250K Dish Back Audio Taper Full Size Short, split, knurled shaft potentiometer. CTS's high quality 450G series made specifically for guitar 10% tolerance Standard Audio Taper High quality solid brass shaft and bushing Vintage-style dishback case Low Friction Rotation C-Clip reinforced shaft Pot comes with hardware - nut, lock & dress washer. This is a SHORT shaft pot. Threaded bushing is 1/4" tall X 3/8" diameter. 24 tooth fine spline shaft is .236 inch diameter. Requires a 3/8" mounting hole. NOT SUITABLE FOR IMPORT GUITARS USING METRIC PARTS Pot is manufactured by CTS for The Art Of Tone - Part # 450GT25K254A2L

  • Brand: CTS
  • ASIN: B071R5XS6Z
  • UPC: 691852992119
 - Lot of 3 (3X) CTS 450G Series 250K Vintage-style Short Split Shaft Audio Taper Potentiometers for Stratocaster
Lot of 3 (3X) CTS 450G Series 250K Vintage-style Short Split Shaft Audio Taper Potentiometers for Stratocaster

These are from CTS 450G series made specifically for use in guitars. High quality construction and reliability make them a great choice. The 1/4 inch; bushing height and 250K resistance make them a great choice for replacing or upgrading electronics in Fender Strats Please Note! These pots require a 3/8 inch mounting hole and are not compatible with guitars using metric components.

  • Brand: CTS
  • ASIN: B00OF7FK8Q
  • UPC: 683405543022
 - Bourns 250K Short Shaft Audio Potentiometers - Set of Three (3X)
Bourns 250K Short Shaft Audio Potentiometers - Set of Three (3X)

Set of 3 Bourns 250K SPLIT knurled shaft audio taper potentiometers with low friction rotation. This a short shaft pot (threaded bushing is 3/8" tall and 3/8" diameter, shaft is 1/4" diameter). Pot is manufactured by Bourns. Note: 1. Requires 3/8" diameter mounting hole 2. If you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.

  • Brand: Bourns
  • ASIN: B014BV5M88
  • UPC: 683405543336
 - CTS 250K Short Shaft Audio Pots Lot of 3 (3X) 450G Series w/Orange Drop .047uF Cap
CTS 250K Short Shaft Audio Pots Lot of 3 (3X) 450G Series w/Orange Drop .047uF Cap

This set up is ideal for replacing pots and cap in your Strat. High quality pots and cap. Not for metric guitars. Please don't flame us because the cap is not a Sprague. Sprague stopped making orange drops in 2012, and Cornell Dubilier has been making them since.

  • Brand: CTS & Cornell Dubilier
  • ASIN: B00GK75WXC
  • UPC: 796762764341
 - PAIR (2X) CTS 450G Series 250K Short SOLID Shaft Audio Taper Potentiometers / Pots - 10% Tolerance
PAIR (2X) CTS 450G Series 250K Short SOLID Shaft Audio Taper Potentiometers / Pots - 10% Tolerance

CTS 450G 250K Solid Shaft Pots - Great choice for Telecasters.

  • Brand: CTS
  • ASIN: B00KPFGNB0
  • UPC: 683405542896
 - CTS 250K Short Split Shaft Audio Pots - 450G Series - Lot of 3 (3X) + .022uf Orange Drop cap for Fender Strat
CTS 250K Short Split Shaft Audio Pots - 450G Series - Lot of 3 (3X) + .022uf Orange Drop cap for Fender Strat

This set up is ideal for replacing pots and cap in your Strat. High quality pots and cap. Not for metric guitars. Please don't flame us because the cap is not a Sprague. Sprague stopped making orange drops in 2012, and Cornell Dubilier has been making them since.

  • Brand: CTS
  • ASIN: B00GK73HI4
  • UPC: 796762764334
 - Fender 250K 15A Audio Taper Snap-In Potentiometer, Solid Shaft
Fender 250K 15A Audio Taper Snap-In Potentiometer, Solid Shaft

Top-quality potentiometers used on U.S. Fender instruments 250K 15A audio taper snap-in potentiometer. 1/4" solid shaft design. Accepts set screw mounting knobs. Used in Blues Deluxe/DeVille, Hot Rod Deluxe/DeVille, Bassman 300, Pro Tube Concert, Pro Tube Twin, Super Reverb, Princeton Recording Amp, and Bassman TV Series amplifiers manufactured from 1994-Present.

  • Brand: Fender
  • ASIN: B00LJY3LU2
  • UPC: 885978546633
 - 10 Bulk Pack Genuine CTS Tone / Volume 250K Split Shaft Audio Taper Pots for Fender Strat
10 Bulk Pack Genuine CTS Tone / Volume 250K Split Shaft Audio Taper Pots for Fender Strat

CTS 450G series potentiometers made specifically for guitars. High quality construction. These pots are perfect for use in your USA or MIM Stratocaster. These pots are imperial sized and will not fit in guitars that use metric components (imports)

  • Brand: CTS
  • ASIN: B009Z0E8F4
  • UPC: 759681014713
 - Bourns 250K Short Split Audio Taper Push/Pull Pot - 1X
Bourns 250K Short Split Audio Taper Push/Pull Pot - 1X

  • Brand: Bourn
  • ASIN: B00V8W851A
  • UPC: 683405543237
 - Allparts EP-0385-000 250K Balance Blend Pot
Allparts EP-0385-000 250K Balance Blend Pot

Dual 250K Blend/Balance linear taper pot with center detent. Includes hardware. Threaded bushing diameter ~.272", threaded bushing height 3/8", shaft diameter ~.232"

  • Brand: Allparts
  • ASIN: B001EWWO52
  • UPC: 645208006999
 - 450G Series Bulk Lot of 10 (10X) CTS 250K Short SOLID Shaft Audio Taper Potentiometers / Pots - 10% Tolerance
450G Series Bulk Lot of 10 (10X) CTS 250K Short SOLID Shaft Audio Taper Potentiometers / Pots - 10% Tolerance

These are from CTS's 450G series made specifically for use in guitars. High quality construction and reliability make them a great choice. The 1/4" bushing height and 250K resistance make them a great choice for replacing or upgrading electronics in Fender Teles or P-Bass's Please Note! These pots require a 3/8" mounting hole and are not compatible with guitars using metric components.

  • Brand: 450G Series
  • ASIN: B00IZQXQUW
  • UPC: 720189710056
 - Seismic Audio 8 Pack of Logarithmic Taper Volume Pots 250K-Ohm-Coarse Knurled Split Shafts (SAGA48-8Pack)
Seismic Audio 8 Pack of Logarithmic Taper Volume Pots 250K-Ohm-Coarse Knurled Split Shafts (SAGA48-8Pack)

8 Pack of Logarithmic Taper Volume Pots 250K-Ohm - Model: SAGA48-8Pack, Logarithmic Taper Volume Pots, 250K Ohm Resistance, Split Shaft with Coarse Knurling, Fits most all electric guitars. Ideally suited for single coil pickups, this 8 pack of Replacement Volume Pots produce a warm sound to complement low-output guitars. Easy to use solder lugs make installation a snap. The coarse knurled shaft will accept most knobs. This Replacement Volume Pot is designed for electric guitars from any manufacturer. That includes Fender, Gibson, Ibanez, Epiphone, Squire, ESP, Paul Reed Smith, Jackson, Yamaha, BC Rich, Schechter, Ernie Ball, and many more. Measurements: 6mm Knurled Shaft, will fit most standard 6mm push-on knobs. Shaft Length: 25/64" (10mm) Bushing Size: 17/64" (6.8mm)Diameter X 1/4" (6.35mm) Length Mounting Hole: 17/64" (6.8mm) Total Length(Top of Shaft to Bottom of Pot): 1-1/16" (27.45mm) Base Diameter: 3/4" (19mm) Includes Dust Seal

  • Brand: Seismic Audio
  • ASIN: B01H2B81M8
  • UPC: 847861042820
 - Allparts EP-4685-000 CTS 250K Long Thread Pot
Allparts EP-4685-000 CTS 250K Long Thread Pot

250K Long Shaft Potentiometer Audio Taper Manufactured by CTS Split Shaft

  • Brand: Allparts
  • ASIN: B000USRB5Y
  • UPC: 645208007712
 - 2-pack 250K Long-Shaft Audio-Taper Guitar Volume Potentiometers
2-pack 250K Long-Shaft Audio-Taper Guitar Volume Potentiometers

This is a two-pack of nice narrow-profile long-shaft 250KOhm audio taper pots, perfect for use as volume controls in a guitar, amp or cigar box guitar! As you can see from the photo to the left, these are narrow-profile pots with a 15mm base. The extra-long shafts on these pots make them perfect for getting through the wide walls of cigar boxes, so they are great for cigar box guitars. The shafts of these pots should fit into all of the knobs we sell as well. These are nice quality pots that should work well for most any standard audio/instrument usage.Base Width (including solder lugs): 7/8" (47.625mm) Total Height (Including base): 1 3/16" (30.1498mm) Shaft Diameter: 1/4" (6mm) Shaft Height: 21/32" (16.6624mm) Shaft Thread height: 17/32" (13.4874mm)

  • Brand: C. B. Gitty
  • ASIN: B0077CY9RO
  • UPC: 610074052104
 - TAOT Wiring Kit - Fender Jazz Bass j-Bass - Solid Shaft - Orange Drop Cap
TAOT Wiring Kit - Fender Jazz Bass j-Bass - Solid Shaft - Orange Drop Cap

TAOT Wiring Kit - Fender Jazz Bass® All parts in the kit are extremely durable high quality parts sized for USA manufactured Fender's® Upgrade your components and hear the difference for years to come. Note! - Unfortunately, these parts are not compatible with import guitars using metric sizing.

  • Brand: The Art Of Tone
  • ASIN: B01LDL6F2Q
  • UPC: 691852991860
 - All Parts EP 0085-000 250K Audio Pot
All Parts EP 0085-000 250K Audio Pot

250K Audio Pot, CTS, split, knurled shaft with nut, lock and dress washer. Threaded bushing is 3/8 Inch tall

  • Brand: Allparts
  • ASIN: B004MND0E4
  • UPC: 645208034770
 - Musiclily Guitar Full Size Pots A250K Split Knurled Long 18mm Shaft Audio Volume Taper Potentiometers for Stratocaster and Telecaster Guitar Bass Parts (Pack of 2)
Musiclily Guitar Full Size Pots A250K Split Knurled Long 18mm Shaft Audio Volume Taper Potentiometers for Stratocaster and Telecaster Guitar Bass Parts (Pack of 2)

  • Color: A250K
  • Brand: Musiclily
  • ASIN: B00G9AZWVW
  • UPC: 632963177309
 - BOURNS PDB241-GTR02-254B0 (Pack of 2), 250K SHORT (3/8
BOURNS PDB241-GTR02-254B0 (Pack of 2), 250K SHORT (3/8" Bushing) SOLID SHAFT AUDIO TAPER POT, POTENTIOMETERS

Pack of 2 - 250K Ohms/20% Tolerance

  • Brand: Bourns
  • ASIN: B06ZYWNL2Z
  • UPC: 609722125789

250k Audio Taper Pot V922 Search Results

Looking for more 250k Audio Taper Pot similar ideas? Try to explore these popular searches: Mule Ringer, Indian Remy Wigs, and Iso Tamer Cleanse Smoothing Shampoo.

Look at 250k Audio Taper Pot Video Reviews

Upgrading control pots: choosing the right pots and knobs

250k Audio Taper Pot Review

http://www.stewmac.com/ Lots of low-cost guitars play great, even though the manufacturers cut ...

Tags: control pots,potentiometers,wiring,caps,capacit...

Guitar Potentiometers part 2, Comparing Linear/Audio Taper and Selecting Pots

250k Audio Taper Pot Review

http://www.planetz.com/more-on-selecting-pots-and-evaluating-tapers. In this video, I demonstrat...

Tags: potentiometer,pot,taper,linear,audio,logarithmi...

Guitar volume pot listening test 500k vs 250k on Humbucker and Single Coils

250k Audio Taper Pot Review

Just had to get this one off my chest. Whilst there are many variables to consider, the tradition...

Tags: guitar volume,volume pot,volume pot value,floyd...

Guitar Potentiometers: Why change them?

250k Audio Taper Pot Review

http://www.planetz.com/why-change-guitar-potentiometers/. I've read stories of people saying how ...

Tags: potentiometer,Bourns,PDB241-GTR01,CTS,EP086,Alp...

GIBSON POTS ARE THE BEST AND HERE IS WHY.........

250k Audio Taper Pot Review

What ever company is making GIBSON POTS is following Gibson's specifications and those spscs are ...

Tags: Potentiometers Gibson,CTS,Chinese,B Type POTs..

Xldealo.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com